OKMX6ULL-S is an embedded Linux ARM technology based single board computer designed based on i.MX6ULL processor. It is a complete, ready-to-use embeddedsystem development board consisting a CPU module with based board, its CPU module is with compact size even smaller than NXP original SoM. OS Linux is well supported. This item aims at low power applications such as automotive telematics, IoT gatewaym HMI, home energy management systems, smart energy concentrators, intelligent industrial control systems, electronics POS device, smart appliances, financial payment systems, etc.
FETMX6ULL-S System on Module | ||||||
CPU | i.MX6ULL@800Mhz | CAN | 2 | |||
USB | 2 | SD/ MMC/ SDIO | 2 | |||
RAM | 256MB DDR3 | Ethernet | 2x 10/ 100M | |||
ROM | 256MB NAND Flash | UART/ IrDA | 8 | |||
Voltage input | 5V | EINT/ GPIO | supported | |||
GPU | PXP | Video codec | software codec | |||
Dimensions | 35* 44mm | Camera | 1, 8-bit(DVP),up to 5-Megapixel | |||
Package | edge soldering | PWM | 8 | |||
OS | Linux4.1.15 | ADC | 10 | |||
LCD | RGB 24-bit, up to WXGA (1366 x 768) | eSAI | 1 | |||
Audio | 3 | Keypad | 8* 8 | |||
IIC | 4 | SPDIF | 1 | |||
SPI | 4 | QSPI | 1 |
OKMX6ULL-S Single Board Computer | ||||||
Audio | 1x Phone, 1x MIC, 2x Speaker | JTAG | Supported | |||
IIC | 2 | ADC | 4, for resistive touch | |||
CAN | 2 | DIP | boot mode selection | |||
Camera | 1, 13.0MP parallel | Reset | 1 | |||
SD/MMC/SDIO | 1 | PWM | 1, for backlight control | |||
USB Host | 3x USB2.0 | LCD | 1, can support touch function | |||
USB OTG | 1x USB micro 2.0 | WiFi& BT | 1 | |||
Ethernet | 2x 10/100M, RJ45 | GPS | serial port | |||
UART | 3 | 3G/ 4G | USB 3G/4G | |||
Power input | 5V | RTC | supported | |||
Camera | OV9650(preview, photograph) | LED | 2 |
One piece a box, box dimensions: 24*19*10cm
parcel could be sent out by express or air solution within 5 working days after receipt of full payment.
both freight prepaid and collected are optional