Features:
1. Touch screen control panel, equipped with one-button start-stop technology; voice prompts, voice broadcast of the operation faults appearing in the ball washing, more accurate identification of the problem
2. Blue-ray sterilization: the blue light germicidal lamp belt is installed in the chassis. Auxiliary special disinfectant disinfects the sphere in all directions.
3. Ball washing motor: 300W imported right angle geared motor, the performance is more stable, and it can work continuously for a long time at full load.
Type: | Ball Washer Machine |
Size: | 900*450*600mm |
Weight: | 45Kg |
Power: | 2.5KW |
Voltage: | 110V,220V,240V |
Washing speed: | 12000 piece / hour |
MOQ: | 1 Set |
Wooden box size: | 1100*620*1500mm |
Place of origin: | Zhejiang, China |
Use Zone: | Pre-school, amusement park, garden, shopping mall |
Warranty: | 2 year, lifetime technical support |
Use steps:
1. Take the machine to water injection zone, close both the bottom valves of main tank and filter tank of washing machine at the same time.
2. Connect one end of hose to the faucet, put the other end into the main tank, and inject water to the water line.
3.Pour about 50-100 ml special cleaning liquid into the main machine tank.
4.Connect the plug to power supply, Attention:
In China mainland: the 220v, 3-core 2.5 mm2 national standard power cable must be used for power supply, 16A socket, in other countries and areas: match according the motor power, voltage and frequency.
5.Connect the suction tube and transporting tube.
6.Install the air-dry cloth sack,(attention: the connection joint between cloth and fan must be fixed on the rubber ring by stainless steel clamp, to prevent water overflowing. ), The air-dry cloth sack must be extended in straight line, to prevent blocking.
7. Turn on the ball washing switch, the ball suction switch, the ball spitting switch.
8.Machine stats to work normally, at the time of ball suction, please keep constant speed of suction.
9.Inject water into the main box regularly, suggest that supply once every 60 minutes(the water taken by balls would be replenished according to the real status)
10.When the washing is finished, disconnect the power, take the machine to the draining water zone, unplug the main box and drain-pipe, and open the drain valve to drain off water.
11.Open the bottom valve of filter tank, drain off the seeper. And wash it by clean water, and wipe the machine inside and outside dry. Put it back.