Indoor 4g ceiling mount antennas cheap wall-mounted wifi mimo antenna gsm tcqj-xd-2-900/2500v-d
Design For 4G LTE System
YC-698/2700-3D-165mm
Standardized Process Features
ELECTRICAL ▪ Frequency Range : 698-960/1710-2700MHz ▪ Impedance : 50Ω ▪ V.S.W.R : ≤1.5 ▪ Gain : 3DBI ▪ Radiation : Omni ▪ F/B ratio-dB : 20 ▪ Horizontal Beam width -° : 360° ▪ Vertical Beam width -° : 60-90° ▪ Polarization : Vertical | MECHANICAL ▪ Max power : 50W ▪ Antenna Cover : ABS ▪ Cable : 30CM RG58 cable ▪ Connector Type : SMA male ▪ Color : White ▪ Operating Temperature : -40℃~+65℃ ▪ Size : Φ165*90mm ▪ Weight : 0.27kg ▪ Package : 70*49*37cm /11.8kg / 50pcs |
YC-698/2700-3D-165mm,Multi band dome antenna is an omni-directional interior antenna that can receive and send signals from a 360° radios. Range of antenna is dependent on three factors:1)physical obstructions,2)power generated by booster/amplifier,3)reception from outside signal received and distributed by outside antenna. Besides the antenna itself,parts include equipment for mounting on the ceiling .
The ceiling antenna is compatible with the following products:
Booster compatibility: all 2G-4G home and in-building boosters series,and all industrial boosters series.
Cable compatibility: Low coax cables with SMA female on either end.
Accessory compatibility: Couplers and splitters.
a). Multi band(698-2700MHz)Broadband
b). 2G/3G/4G and WLAN systems
c). Omni-directional antenna broadcasts signal in all directions
d). 3dB gain
e). Designed for indoor use only,ceiling mounted ,easy to install
Assembly Production Pictures
Standard Tips :
1* antenna with cable and connector.
1* mounting bracket .
Normally we use SMA or N connector, If you need other type connectors, please inform us. We will confirm if we can do it or not.This is an antenna only. It doesn't work alone. You need a cell phone signal booster or repeater or router to work with this antenna, When the antenna designed together with the cable, in order to reduce the loss of the signal.the cable length is less than 15 metres .It can be install easily . If you have problem for installation,please email us directly .
Antenna is comprised of connector,pleat,cable,connecting rod and outer cover.
Drill a 35mm diameter hole in the ceiling. The ceiling thickness should be 20mm,maximum.
Unscrew fixing nut from antenna,Place antenna cable through hole,Screw the fixing nut back onto antenna and cable on crawlspace side of ceiling and fasten.
Attach the N female connection from the interior antenna to the cable leading to the connector labeled inside,on your booster/amplifier.
Tighten fixing nut to secure antenna (do not over-tighten).
Storage and Transportation: Store and place in non-extreme room-temperature and dry enviroment attention: This antenna should not be used near open fire or flame.
Package: Standard export cartons.
Package size :70*49*37cm
Quantity : 50pcs
Carton Weight : 11.8KG
MORE ITEMS FOR YOUR CHOICE
We owned adcanced test equipments as following :
Mocrowave Chamber : for Near-field vacuum test. it can help to test the performance simulation state of the antenna, which including patterns,VSWR,gain in simulation state.
Antenna far-field automatic measurement system : For far-field vacuum test. It can help to test the antenna performance simulation state if the antenna ,which including patterns,VSWR,gain in true state
The automatic wire stripping machine can accurate to 0.001mm to ensure accurate stripping while stripping .The rate equivalent to 2-3 times as old machine and it can ensure product consistency.
Salt Mist Corrosion test : Make sure antenna can work in different condition. it can help to test the antenna enclsoure,antenna material antenna bracket in bad enviroment and check out if the materials is ok or not .
Drop tester : Make sure antenna can work under tensile. Because some time, we are worry about our cartons is easy broken during the delivery by express company .
Network analyzer : There are 8pcs network analyzer in our factory,which can test VSWR,Attenuation return loss,Isolation and there are 2pcs network analyzer are for testing when making the antenna in production line .
Please contact us to get full product list of our antenna series products!
Visit our website at www.ystoom.com . Free sample available for test before you place bulk order .
No cost,No risk !
Or you could click here to find more antennas from Ystoom !
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier