High Tensile Fastener nut and bolt inconel fastener 600 601 625 718 800 825 bolt nut washer
Type | Stud Bolt | Hex Bolt (full thread, partial thread) | Threaded Rod |
U-Bolt | Hex Socket Cap Screw | Hex Nut | |
Flat Washer | Spring Washer | ||
Size | Stud Bolt | DIN: M6~M100 | ASME: 1/4"~5" |
Hex Bolt | DIN: M6~M64 | ASME: 1/2"~2 1/2" | |
Finish | Cold galvanizing, Hot-dip Galvanizing, PTFE, Zinc Nickel, Black coating, Plain | ||
Producing Standard | ASME | ASME B18.2.1 | Hex Bolts |
ASME B18.2.2 | Hex Nuts | ||
ASME B18.22.1 | Plain Washers | ||
DIN | DIN931 | Hex Bolt with partial thread | |
DIN 933 | Hex Bolt with full thread | ||
DIN 912 | Hex Socket Cap Screw | ||
DIN 934 | Hex Nut | ||
DIN 125 | Plain Washer | ||
DIN127 | Spring Washer | ||
DIN 975 | Threaded Rods | ||
DIN 976 | Stud Bolts | ||
DN 3570 | U-Bolt | ||
Material Grade | Stainless Steel | 304/304L, 316/316L, 316Ti, 317/317L, 321, 347/347H, 310, 309, A453 660C, 660D, S31254 /254SMO, 904L /1.4539 /N08904, N08367, N08926 / 1.4529 | |
Duplex Steel | 2205 /S31803, S32750/2507, S32760 | ||
Nickel Alloy Steel | UNS N02200/Ni 200, UNS N02201 /Ni201, UNS N06200/C2000, UNS N10276/ Hastelloy C276, UNS N08031/ Alloy 31 | ||
Carbon Steel | Grade 4.8, 5.8, 6.8, 8.8, 10.8, 12.9 | ||
Alloy Steel | A193 B7, A194 2H, A320 L7, L7M |
UNS Number N06600
Other common names: Alloy 600
Inconel 600 is a nickel-chromium alloy used for applications that require corrosion and high temperature resistance. This nickel alloy was designed for service temperatures from cryogenic to elevated temperatures in the range of 2000° F. It is non-magnetic, has excellent mechanical properties, and presents the desirable combination of high strength and good weldability under a wide range of temperatures. The high nickel content in Inconel 600 enables it to retain considerable resistance under reducing conditions, makes it resistant to corrosion by a number of organic and inorganic compounds, gives it excellent resistance to chloride-ion stress-corrosion cracking and also provides excellent resistance to alkaline solutions. Typical applications of this nickel alloy include the chemical, pulp and paper, aerospace, nuclear engineering and heat treating industries.
In what form is Inconel 600 Available?
• Sheet
• Plate
• Bar
• Pipe & Tube (welded & seamless)
• Fittings (i.e. flanges, slip-ons, blinds, weld-necks, lapjoints, long welding necks, socket welds, elbows, tees, stub-ends, returns, caps, crosses, reducers, and pipe nipples)
• Wire
What are the characteristics of Inconel 600?
• Resistant to a wide range of corrosive media.
• Virtually immune to chlorine ion stress corrosion cracking
• Non-magnetic
• Excellent mechanical properties
• High strength and good weldability under a wide range of temperatures
Ni + Co | Cr | Fe | C | Mn | S | Si | Cu |
72.0 min | 14.0-17.0 | 6.0-10.0 | .15 max | 1.00 max | .015 max | .50 max | .50 max |
In what applications is Inconel 600 used?
• Chemical industry
• Aerospace
• Heat treating industry
• Pulp and paper industry
• Food processing
• Nuclear Engineering
• Gas turbine components
Fabrication with Inconel 600
Alloy 600 can be both hot formed and cold formed using typical processes. Hot working should be performed between 1600 F and 2250 F avoiding any work between1200-1600 F because the ductility decreases in this temperature range. Welding Alloy 600 can be achieved via shielded metal-arc welding, TIG, and MIG.
Pipe Smls | Pipe Welded | Tube Smls | Tube Welded | Sheet/Plate | Bar | Forging | Fitting | Wire |
B167 | B517 | B163 | B516 | B168 | B166 | B564 | B366 |
Product Form | Condition | Tensile (ksi) | .2% Yield (ksi) | Elongation (%) | Hardness (HRB) |
Rod & Bar | Cold-Drawn | 80-100 | 25-50 | 35-55 | 65-85 |
Rod & Bar | Hot-Finished | 80-100 | 30-50 | 35-55 | 65-85 |
Tube & Pipe | Hot-Finished | 75-100 | 25-50 | 35*55 | - |
Tube & Pipe | Cold-Drawn | 80-100 | 25-50 | 35-55 | 88 Max |
Plate | Hot-Rolled | 80-105 | 30-50 | 35-55 | 65-85 |
Sheet | Cold-Drawn | 80-100 | 30-45 | 35-55 | 88 Max |