Inconel 718 Ring
Inconel 718 Chemical composition
Alloy | % | Ni | Cr | Fe | Mo | Nb | Co | C | Mn | Si | S | Cu | Al | Ti |
718 | Min. | 50 | 17 | balance | 2.8 | 4.75 |
|
|
|
|
|
| 0.2 | 0.7 |
Max. | 55 | 21 | 3.3 | 5.5 | 1 | 0.08 | 0.35 | 0.35 | 0.01 | 0.3 | 0.8 | 1.15 |
Inconel 718 Physical properties
Density | 8.2 g/cm³ |
Melting point | 1260-1340 °C |
Inconel 718 Alloy minimum mechanical properties in the roomtemperature
Alloy | Tensile strength | Yield strength | Elongation | Brinell hardness |
Solution treatment | 965 | 550 | 30 | ≤363 |
718 Characteristic as below:
1.workability
2.High tensile strength,endurance strength,creep strength and rupture strength at 700°C.
3.High inoxidability at1000°C.
4.Steady mechanical performance in the low temperature.
5.Good welding performance.
Inconel 718 Metallurgical structure
718alloy is Austenitic structure, precipitation hardening generate "γ" made it excellent mechanical performance. G rain boundary generate "δ" made it the best plasticity in the heat treatment.
Inconel 718 Corrosion resistance
718 alloy with extremely resistance to stress corrosion cracking and pitting ability in high temperature or low temperature environments, especially the inoxidability in the high temperature.
Inconel 718 Application field:
The elevated temperature strength, excellent corrosion resistance and workability at 700°C properties made it use in a wide range of high requirement environments.
1.Steam turbine
2.Liquid-fuel rocket
3.Cryogenic engineering
4.Acid environment
5.Nuclear engineering
Sheet/Plate | Round bar/Wire | Pipe | Tube |
ASME SB-670 ASME SB-906 AMS 5596 AMS 5597 AMS 5950 AMS 5914 | ASME SB-637 AMS 5662 AMS 5663 AMS 5664 AMS 5832 AMS 5962 | AMS 5589 AMS 5590 | AMS 5589 AMS 5590 |
Main products
Corrosion Resistant Alloy including: Nickel 200, Nickel 201, Monel 400, Monel K-500,
Inconel 625, Inconel 686, Inconel 690, Inconel G-3, Incoloy 020, Incoloy 028,Inconel 825,
Incoloy 925. Cronifer 926, Hastelloy B, Hastelloy B-2, Hastelloy C, Hastelloy C-276,
Hastelloy C22, Hastelloy C4, Inconel 600, Inconel 601, Inconel 617,Inconel 725, Inconel 800,
Incoloy 800H, Incoloy 800HT, etc.
High Temperature Alloy Including: Incoloy A-286, Inconel 783, Inconel X750, Inconel 718,
Hastelloy B-3, Hastelloy X, Nimonic 80A, Nimonic 901,Nimonic 75 Waspaloy etc
High Precision Alloy including: Kovar, Invar, Permendur 2V, Permalloy, F15 etc
Precipitation Hardening Steel Including: 17-4PH, 15-5PH, 13-8MoPH, 17-7PH etc
Puplex Stainless Steel including: F52/Mo Plus, F51/2205, F55/ZERON100, F44/254-SMO etc
Special Stainless Steel including: F309/309H, F310/310, F347/347, F348, 904L, 201, 202, 304, 304L, 316, 316L, 310, 410, 430etc.
Alloy Steel including: 40Cr, 42CrMo4, 35CrMo, 15CrMo etc
Ni-Cr and Ni-Cr-Fe alloy including: Ni80Cr20, Ni70Cr30, Ni60Cr15 etc.