In 2 Out 12/24/48/96 Price Ribbon Connector Fiber Protection Sleeve
In 2 Out 12/24/48/96 Price Ribbon Connector Fiber Protection Sleeve
Product Detail
| Purpose | To Protect Ribbon splices of multiple fiber counts. |
| Fiber Qty Range | from 2 to 12 fibers |
| Application | Multi Fibers Protection |
| Material | Steel |
| color | White |
| Insertion Loss | ≤0.2dB |
| Return loss | ≥50dB |
| No. of Fiber | 1. |
| Use | FTTH |
Brief Introduction :
Generally speaking, Hicorpwell fiber optic sleeve consists of three parts. The first part is the inner tube made by hot-meltable adhesive. This material can encapsulate the fusion splice joint and provides vibration damping and an environmental seal so as to protect the fiber from damage and contaminants. The second part is a reinforcing strength member outside the inner tube.
The strength member can be made of stainless steel, ceramic or non-metallic. It offers extra rigidity to prevent misalignment, micro bending or breakage of the fiber. The third part is the heat-shrinkable outer tube made of cross-linked polyolefin. This tube provides an instant shrink-force and drives the adhesive liner into all areas of the splice and excludes all the air. The following picture shows the structure of a fiber protection sleeve.
Two Types of Fiber Protection Sleeve
This kind of protection sleeve is used for Single Mode Fiber. Its strength member adopts the stainless steel needles to reduce fiber damage. Typical lengths are 40 mm and 60 mm. The sleeve color is selective, but most people would choose the transparent tube for better inspection of the fiber status.
Ribbon Fiber Protection Sleeve
The ribbon type is to protect ribbon splices of multiple fiber counts. The ceramic strength member is used to supporting the splices. Fiber counts in a ribbon sleeve vary from 2 to 12 fibers. The length of the sleeve is usually 40 mm. If stronger protection is required, you can choose the ribbon protection sleeves with double ceramic strength members.
Hicorpwell Fiber Optic Sleeve Characteristics:
Single holed (pre-shrunk)
Clear sleeve design
Smooth stainless steel reinforcing member
Sealing structure suitable to temperature
Extended liner length
Low shrink temperature
Pre installed stainless steel or ceramic rod
Accommodates single or ribbon fibers
Wide range of sizes
Operating temperature -45degree to 100degree
Min. full recovery temp: 120degree
Hicorpwell Fiber Optic Sleeve Application:
Fusion splicing
Fiber cable protecting
Outdoor Networking Net Cable types, connector types and cabling topologies are defined earlier.
Factory Direct Supply For Sc Upc Apc Weight Is A The Same As An Ethernet Patch Cord Cable
Cat6 Ethernet Cables True What Is The Difference Between Cat6a And Cat7 Indoor Net Management Networking Cable
Indoor Net Cable Management Networking Cable Types CAT5 CAT6 CAT7 without Stainless Steel Cable Netting
ABS Plastic Box Type Plc Splitter Sc/Apc SC/UPC Connector 1*2 Fiber Optical Cassette Plc Splitter
Fiber Optic Cable
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier