ISONEM ANTIFIRE WOOD VARNISH, UNIQUE TRANSPARENT CLEAR INTUMESCENT FIRE RETARDANT FOR WOOD, FURNITURE, DOOR, TABLE ETC.

ISONEM ANTI FIRE WOOD VARNISH

(Antifire Wood Varnish, Clear and Fire Rated)

TRANSPARENT FIRE RETARDANT VARNISH FOR WOOD AND WOODEN STRUCTURES

ISONEM Antifire Wood Varnish is a fire resistant, water based, intumescent and transparent thin film coating used for the protection of the wooden surfaces in the interior against fire. In the outdoor applications, the Antifire Wood Varnish applied surfaces must be protected by water-based wood varnish application. Thanks to its transparent structure, when applied, it provides a surface with a highly fire-retardant performance without changing the color of the surface. If a different color is desired, a coloring agent may be applied to the surface before the application. It is nature friendly. It does not contain VOC and solvent, it is extremely simple to apply.

USAGE AREAS:

·         Raw wooden surfaces,

·         Wooden doors,

·         Interior furniture,

·         Historical monuments,

·         Finished wooden buildings,

·         Hotels, theatres, entertainment venues, ships, computer rooms and other public facilities.

FEATURES / ADVANTAGES;

-       Water based, nature friendly.

-       Prevents spreading of the flames on the wooden surface.

-       With its superior fire-retardant performance, prevents the wood from being ignited immediately.

-       Slows down the speed of fire progress.

-       Does not emit toxic fumes.

-       Provides additional safety against fire in closed and risky places where people are gathered.

-       Easy to use. Can be applied with a spray / brush / roll.

TECHNICAL SPECIFICATIONS:

Product Structure                   : Water based antifire varnish with two components,

Color                                      : Transparent

Density (25°C, g/mL) : 1.45 gr/ml ± 0.10

Viscosity (25°C, mPa.s)        : 1500 – 2500

Dust dry time (25°C)  : 18 – 24 hours

Hard dry time (25°C) : 3 days

Through-dry time (25°C)       : 7 days

Mixture life                             : Temperature   Time

                                               +25°C             ~45 minutes

Mixture ratio                           : 2/1 (by weight)

HOW TO APPLY:

-       Surface Preparation

The application surfaces must be dry, clean and free from any dirt, oil, dust and surface wastes.

-       Preparation of the Mixture

ISONEM ANTIFIRE WOOD VARNISH is supplied in ready-to-use kits according to the mixing ratio. Prepare an amount of mixture to be applied by considering the mixture life. Before starting to mix, make sure that temperatures of the materials are between +15 and +25°C. Stir component A with a 300 – 400 rpm mechanical mixer for 3-4 minutes without dragging air in it. Then, pour the entire component B into component A and make sure that no material is left in component B. Stir component A and B at least for 3 minutes until a homogenous mixture is obtained and consume the prepared mixture within 40-45 minutes.

-       Application Method:

ISONEM ANTIFIRE WOOD VARNISH should be applied with a brush, roller or spray to obtain the desired thickness, it should be applied in 2 or 3 coats, wait about 18 - 24 hours for each coat.

WARNING: During and after the application, protect from external factors such as rain, water, mechanical impacts, etc. for 24 hours.

CONSUMPTION: Depending on the surface, approximately 0.300– 0.500 kg/m² (single coat application)

PACKAGING            : 1.5 kg set -   Component A, 1 kg tin can +

Component B, 0.5 kg tin can (hardener)

STORAGE                : 24 months in its original un opened packaging in a cool and dry environment.

Notes: All technical information given in this Product Data Sheet is based on laboratory tests. Actual values may vary due to circumstances beyond our control.

Health and Safety Information: Users should refer to the material safety data sheet (MSDS) of the product for information and recommendations on the safe transport, storage and disposal of chemical products, including physical, ecological, toxicological and other safety related information.

5 CONTINENTS, IN NEARLY 100 COUNTRIES,

ISONEM PAINTS AND INSULATION TECHNOLOGIES INC. was established in Izmir in 2004.It has assumed the leading role with the innovations it has brought up to the sector with its research and development (R & D) team, each of which is specialized in his/her branch at a 7500 m2 closed modern production site landed on an area of 10000 m2 within ITOB Organized Industrial Zone. We have presented the innovative products for defence, energy, agriculture and industrial field and the thermal, sound, fire, water insulation and special chemical products that we have developed to the usage of the mankind and the whole world.

We have managed to have our name echoed via both domestic and foreign successes that we have achieved by adopting sustainable quality as a  principle within every stage by using high technology since the beginnings of our organization.

We have achieved to be a Turkish Company and Trade Mark through our activities in Europe, Africa and Far East which is known well by the whole world in its field by executing exports to approximately 100 countries, basically China, Korea and USA.

Besides our commercial and sectorial success, we have been aware of the fact that today’s world is entrusted to us for the mankind of tomorrows, since we have never used biocidal raw materials within our products as an outcome of our awareness for the environment.

As Isonem, our mission is protecting the nature via electricity generating external housepaints, paints which convert CO2 into Oxygen and many innovative products; and to present a better world worth living.