IS series diesel engine driven centrifugal pump
IS series diesel engine driven centrifugal pump
1, IS \ IR type single-stage single-suction centrifugal pump according to international standard ISO2858 specified performance and dimension design, mainly IS composed of pump body, pump cover, impeller, shaft, sealing ring, shaft sleeve and suspension bearing see, etc.
2, IS \ IR type single-stage single-suction centrifugal pump pump body and pump cover parts, from impeller back place subdivision, what say normally namely after the doors open structure. Its advantage is easy to check and maintain, repair without acting pump body, suction line, discharge line and motor, need to remove the extended coupling among connection parts, can exit rotor parts maintenance.
3, pump shell (i.e., pump body and pump cover) constitute a pump studio. Impeller, shaft and rolling bearing for pump rotor. Suspension bearing components supporting the pump rotor part, rolling bearing by pump radial force and axial force.
4, in order to balance the axial force of pump, most of the pump impeller, before and after are equipped with sealing ring, and in the impeller HouGaiBan the balance hole, because some pump axial force is not big, impeller back did not set sealing ring and balance hole.
5, pump axial sealing ring is by the packing gland, packing ring and packing, etc, in order to prevent the air intake or a large number of water leakage. Pump impeller if there is a balance, is equipped with soft packing cavity and impeller inlet are interlinked, such as impeller entrance liquid in the vacuum state, then easily along the shaft sleeve surface intake, so in the packing chamber are equipped with packing ring through the pump cover holes, will pump indoor pressure water lead to packing ring to seal. Pump impeller if not balance hole, because impeller back liquid pressure is greater than atmospheric pressure, therefore does not exist gas leakage problem, so don't pack packing ring.
6, to avoid axis wear, in shaft through the packing chamber with shaft sleeve parts of the protection. Bush and between shaft must have type O ring, in order to prevent along with surface intake or leakage.
7, pump drive way is through the extended elastic coupling and motor coupling, pump rotation direction, from driving end see, for clockwise.
|
Item |
Single stage end suction centrifugal pump |
|
Suction |
End |
|
Model |
IS series |
|
Material |
Cast iron or stainless steel |
|
Color |
Blue and adjustable |
|
Mode |
Horizontal |
|
Drive |
Belt or coupling |
|
Impeller |
Open impeller |
|
Seal |
Soft packing seal or mechanical seal |
|
Speed |
2900r/min,1450r/min |
|
Theory |
Centrifugal pump |
|
Structure |
Single stage pump |
|
Usage |
irrigation, transfer water and fire |
|
Power |
Electric |
|
Standard or Nonstandard |
Standard |
|
Shaft |
Stainless steel |
|
Outlet diameter |
32-200mm |
|
Capacity |
6.3-400m³/h |
|
Head |
5-125m |
|
Power |
0.55-110kw |
|
Warranty |
1year |
|
Certificate |
ISO9001:2008 |
|
OEM |
Acceptable |
|
Feature |
Cheap, mature technology, widely used |
Send Us Specification(flow and head) For Quotation Now!
*All of the enquiry will be replied within 8 working hours
*Professional pump producer, with design team.
*All of the goods are packed with standard export wooden case(non-fumigation)
*Fast delivery time: common stock model, customed type:7 working days
*Support OEM or ODM
*Fast after-service
Our company established in 1998.With 20 years developing , now our group own three factory(Pearl Pump, Modern Pump and Urumchi Pump) in Chengdu, Dongguan and Urumchi. Head office in Chengdu ,Sichuan province own 50000 s.q meters new plant, 600 professional workers, hundred million equipments and total output thousands of pumps.
To be a group, our business scope have covered all kinds of pumps, like centrifugal pump,submersible pump, vacuum pump, sewage pump, chemical pump, screw pump, diaphragm pump, fire pump, water supply equipment and so on. Also welcome custom-made and OEM service. Pearl Pump is a famous brand in China, and having 20 branches in whole country. Each city have our distributors. If you like, you can be this one in your country.
Cooperating with hundreds of middle traders before 2008,in order to service our big customers better, we built up the overseas department. Dongguan in Guangdong province is our logistics center, you can choose Guangzhou, Shenzhen, Hong Kong to ship.
Every customer mostly care products quality, our group have passed ISO9001:2008 quality control system. Double testing is our quality policy. 12 months warranty time and necessary spare parts are welcomed by our customers. For international trade, third party inspection is supported.
Q1:Are you manufacturer or trading company?
Our company are professional producer for pumps,and export pumps by ourselves.
Q2:What's your business scope?
We manufacture end/double suction centrifugal pump,vertical/horizontal multistage pump,sewage pump,vacuum pump,chemical pump, oil pump,screw pump, diaphragm pump, fire pump, constant pressure VFD water supply system and so on.
Q3:What's information for enquiry?
Basic information:flow and head.If special design,pls provide drawing.50HZ or 60HZ are both OK.
Q4:What's your payment terms?
Common payment terms:T/T 30% deposit,balance payment before shipment.
Western Union
Q5:How about warranty and after-service?
12 months warranty time after receiving days,not include quick-wear parts and default phase.We promise 24 hours action for your problem.And send parts by air or express for your fix.
Q6:How to reach us?
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier