IS series clean water pump driven by diesel engine

IS horizontal centrifugal clean water pump

Introduction          

1.Application : industry and city draining and the farmland irrigation.

2.IS series single stage single suction horizontal centrifugal water pump is provided in accordance with international standards IS02858 performance and size of the design

3.Its technical standards are to international standards, reached to the international advanced level. It’s china’s promotion of energy-saving pumps.

Working condition

 1. Media : clean water or similar to clean water liquid without solid granules.

2. IS series water pump Max. temperature is 80°C; 

3. ISR series water pump Max. temperature is 130°C;

4. ISY series is used for transportation of ligh oil such as gasoline or diesel. 

5. Max. inlet pressure is 1.6MPa

Main structure and chart

1.The series of single-stage centrifugal pump casing and cover make up of the operating room of pump.The impeller,shaft and ball bearing make up of the rotor parts of pump.The hanger supports the rotor parts of pump.2.The axial and radial force of pump is borne by the ball bearing.The axial sealing of pump is made up of packing gland, packing and packing ring  (mechanical sealing also can be used),which to avoid gas to enter and greatly leak.
3.The shaft sleeve is installed on the position of packing to protect the shaft to avoid the wear of shaft. sealing ring is installed between the shaft and sleeve to avoid gas to enter and leak along the surface of shaft.
4.The front and back of impeller mostly has sealing ring to balance the axial force,and there is balancing hole on the back cover plate of impeller.If the axial force is not too big,there no sealing ring and balancing hote on the back of impeller.
5.The elastec coupler and motor is connected to drive.The revolving of pump is clockwise when being viewed from the end of driving.

6.The pump applies to the area of 50HZ or 60HZ power source.

Dear  Customer:

Welcome to our website and hope our products will make you satisfied.

We think creatively,design bravely,manufacture precisely and loyaly to our customers. And we have our own factory.so We can produce the products  according to customer requirements.

Company Profile

Tai'an Ocean Pump Co., Ltd. specializes in producing sand pumps, slurry pumps, diesel water pumps, vertical sand pumps, cutter suction dredgers, jet suction dredgers, hydraulic cutter suction dredgers, floaters, discharging sand pipe, etc. 

With the accumulation and development of years, we have formed a complete system of slurry pump design, selection, application and maintenance. We are devoted to offering the best solutions of slurry pump application in the world. Our products are widely used in mining, metallurgy, coal washing, power plants, sewage water treatment, dredging, and chemical and petroleum industries. With the confidence of our clients at home and abroad, we are becoming one of the most important slurry pump suppliers in China, and we have offered professional pump solutions and services to over 60 countries in the world. 

We would like to work and create a mutually brilliant future with you together!