IPX12 IPX34 IPX56 Water Proof Grade Test Chamber Rain Spray Resistance Tester, IP Waterproof Climatic Test Equipment Factory
Summary:
This Rain water resistance spray testing is used to simulating the lighting , auto parts , household appliances and other products in condition of moisture or rain , to see the influence of water to the products. Through this can test the resistance to the rain penetration and moisture proof ability of products. Rain spray testing through a rigorous scientific design, making it can realistically simulate dripping rain, splashing water , water spray and other environment. It uses advanced controlling system and inverter technology , making the rotation angle of the specimen frame, the swing angle of the oscillating bar and the water swing rate can be automatically adjusted.
Standards:
GB2423.38 - 90 , GB5170.20 -90 , GB 4208-93, IPX4 waterproof test methods etc...
Features:
1. Comply with requirement of IEC60529 standard IPX3 water pouring test and IPX4 water splash test.
2. The test sample will be put or installed on the center of the half-round sinuous pipe and make the
bottom of the test samples and the oscillating axis in a horizontal position. During test, the sample
would spin around the center line.
3. Can manual default the test parameters, complete testing automatically shut off the water supply and pendulum pipe angle automatic zeroing and automatic eliminate seeper, avoid scale blockage needle tip.
4. Inner case’s material is imported steel plates; shell is made of #304 stainless steel.
5. Water pressure and flow rate adjustable.
6. Unique sprinkler can stably control the rain quantity and pressure.
Speficiations:
IPX1, IPX2
Water drop rate: 1~5mm/min (±0.5mm/min) Water falling area: 0.4m2 Distance between water drop holes: 20x20mm Drip hole: Φ0.4mm Test table angle: 0° and 15° respectively. Water supply pressure: ≥0.01Mpa |
IPX3, IPX4
Internal Dimension(W*D*H):800*800*800mm Test Speed (rpm): 1~5 can be adjustable, wheel diameter 300mm, can be adjustable 15° tilt angle, rotary table height is adjustable 200mm. Water ring radius: 300mm Nozzle hole: φ 0.4mm, Pitch of holes: 50mm Pendulum Swing tube range: About±180°(can adjustable to ±45°±60°±90°) The flow of each blowhole :0.07 L/min +5% Spray nozzle swing speed :IP3 15 times/min; IP4 10 times/min Environment temperature: RT~50°C Environment humidity: ≤85%RH Test of time :1-999,999min (Can be set) The water pressure:80~150Kpa (Can be Adjusted) Power: 220V 50Hz |
NEWGOER though 20 years of continuous development, our company has established the main products line of Universal strength testing machines for tension, compression, flexure, and shear etc. Environmental testing chambers and Cell phone, Computer and 3C Electronics testing machines, Package and paper test equipment, Plastic and Rubber Test Equipment, Leather and Shoes Testing Machine and so on! Our equipment is used in over 80 countries worldwide and supported by a network of offices and approved agencies. Our products are used in all industries and educational sectors and we have an enviable reputation for innovation, quality product and excellent customer support !
Our Factory
We have professional packing teams and shipping forwarder to pack and deliver your products!
Packing:
1. Out packing:Standard export wooden case.
2. Inner packing:With careful stretch film wrap product, hard wood board+ strong bandage to fix corners.
3. Checking teams: Specialized staff to inspect and classified your goods.
Shipping:
You can specify other shipping methods such as Airmail, FEDEX or DHL. We shall let you know about the shipping cost after receipt ofyour order. It's more preferable for you to provide us with your own FEDEX/DHL account number so that the delivery charge can be charged directly from your account.
IEC60695 Glow Wire Flammability Temperature Tester, Glow Wire Combustion Resistance Testing Machine, Glow Wire Burning Tester
1.Are your company a trading one or a factory ?
Factory + trade (integration), 20 years focusing on test instruments field, 6 years exporting experience.
OEM is also acceptable for us.
2.How to choose the most suitable products?
Our professional team will give you the best suggestion as long as you tell us what kind of test you
need to do and the required specification.
3.What’s the delivery term?
At most of time, we have stock in the factory. If there is no stock, normally, the delivery time is 15-20
working days after deposit receipt. If you are in urgent need, we can consider making special
arrangement for you.
4.Do you accept customization service?
Yes, of course, we can not only offer standard machines, but also customized machines according to
your request. Don’t hesitate to tell us your requirement, we will try our best to meet your needs.
5.Can we visit your factory before order?
Yes, we warmly welcome and sincerely invite you or your team to visit our factory, we will help to
arrange hotel and pick up you from airport.