IP68 Waterproof RFID access card reader
1.Features
> Metal shell, anti-vandal
> Very low power consumption,standby current less than 30mA
> WG 26 output
> Fast Search speed : time between reading card and opening the door is less than 0.1S
2.Specifications
Operating Voltage | 9-12V DC |
Card type | EM/Mifare |
Reading Distance | 3-6 cm |
Quiescent Current | ≤30mA |
Operating Temperature | -45℃~60℃ |
Operating Humidity | 10%- 90% RH |
Waterproof | Conforms to IP68 |
Dimension | 110*48*20 MM |
3.Installation
> Drill the holes on the wall according to the hole size of the back cover or install the cable box on the wall. And Fix the back cover firmly on the wall with the supplied screws. (Picture below)
> Thread the cable through the cable hole, connect the wire needed, wrap unused wire with insulating tape in case of short circuit
> Fix the front cover to the back cover with screw driver
4.Wiring
Wire No. | Function | Color | Description |
1 | LED | Blue | Connect controller LED |
2 | Beeper | Yellow | Connect controller beeper |
3 | D0 | Green | WG output line D0 |
4 | D1 | White | WG output line D1 |
5 | +12V | Red | Power supply +12V |
6 | GND | Black | Power supply -12V |
5.Wiring Diagram
6.Packing List
Name | Model | Quantity | Remarks |
RFID Reader | U-P001 | 1 |
|
User manual | U-P001 | 1 |
|
Rubber plug |
| 2 | Φ6mm×30 mm, used for fixing |
Self tapping screws |
| 2 | Φ4mm×28 mm, used for fixing |