The OKMX6DL development board has abundant hardware resources on its carrier board. Ready-to-use on-board interfaces, such as 5M digital camera, standard dual-channel 8-bit LVDS and HDMI-1.4 are preferable for media performace; the SDXC standard SD card interface; RS232, CAN, RS485 interfaces are all designed with protection components to face with industrial environment; improved Li-barttery manage circuit, supporting of IrDA, stereo audio amplifier, on-board 3-axis acceleration sensor which are preferable for portable devices. Both carrier board and CPU module are with industrial and commercial grade opertional to users, the working temp ranges from -40℃ to +85℃.
SoM with minimum system and with LCD interface, which is very convenient for usres to do incoming quality control and aging by running the system just with connection of a 4.2V power input but no need support of the carrier board.
i.MX6DL CPU Module | ||||||
CPU | Freescal i.MX6Dual Lite | IIC | 3-ch | |||
Architecture | A9 | SPI | 2-ch | |||
Main Frequency | 1GHz | CAN | 2-ch | |||
RAM | 1GB DDR3 | USB Host | 1-ch, USB2.0 | |||
Flash | 8GB eMMC | USB Device | 1-ch, USB2.0 | |||
Input Voltage | 4.2V | SD/MMC/SDIO | 2-ch, SD/MMC | |||
2D/3D | supported | Ethernet | 1-ch, Gigabit Ethernet | |||
GPU | IIS interface | Mini-PCIE | 1-ch | |||
PMU | MMPF0100NPEP | UART/IrDA | 5-ch, (1 debug port) | |||
Dimensions | 60mm*60mm | EINT/GPIO | supported | |||
Connection Type | CPU module soldered on carrier board | Video Codec | hardware codec | |||
OS | Android4.4/Linux3.0.35/ LinuxQT4.8.5/Ubuntu 12.04 | HDMI1.4 | 1-ch | |||
LCD | RGB888 (2-ch LVDS with 8-bit) | Camera | 1-ch, 5MP parallel camera | |||
Audio | IIS |
OKMX6DL Carrier Board | ||||||
Audio | 3-ch (1-ch phone, 1-ch MIC, 1-ch speaker) | IrDA | 1-ch, empty soldering | |||
IIC | 2-ch | User Key | 2-ch | |||
SPI | 1-ch | Boot | 1-ch | |||
CAN | 2-ch | Sleeping Awake | 1-ch | |||
Camera | 1-ch, 5MP parallel camera OV5640 | Reset | 1-ch | |||
SDIO | 2-ch | PWM | 2-ch | |||
SD/MMC | 2-ch | GPIO | supported | |||
USB Host | 2-ch, USB 2.0 | EINT | supported | |||
USB Device | 1-ch, USB 2.0 | LVDS | 2-ch | |||
Ethernet | 1-ch, 10M/100M/1000M adaptive | HDMI1.4 | 1-ch | |||
Power Jack | 1x mandatory power, 1x auxiliary power | SATA | 1-ch | |||
Mini-PCIE | 1-ch | WIFI&BT | 1-ch | |||
UART | 4-ch (1 debug port, 2-ch 3-wire serial port, 1-ch 5-wire serial port) | RTC | Supported |
Android4.4 | ||||||
U-boot version | U-Boot 2009,08-dirty | |||||
Kernel version | Linux-3.0.35 | |||||
Drivers | Ethernet port driver(1000M/100M) | SATA2 driver | ||||
RTC driver | Blue tooth driver | |||||
LED driver | eMMC driver | |||||
Audio drivers(IIS interface) | Watch dog driver | |||||
LCD driver | Ext4 file system | |||||
SPI driver | Wifi driver | |||||
USB interface driver | SD card driver | |||||
Serial port driver(3 serial ports are included) | RS485 driver | |||||
PWM driver(Backlight) | LCD FrameBuffer | |||||
User key driver | CAN driver | |||||
Touch driver(Capacitive) |
Linux console | ||||||
Cross-compiler | arm-fsl-linux-gnueabi-gcc-4.6.2 | ARMv7 architecture,support hard floating-point calculation | ||||
Flashing method | USB download flashing | USB one-key flashing | ||||
Single/multiple files automatic flashing | Support system files flashing inEXT4 format | |||||
Flashing tool:MFG tools,Support WindowsXP/Vist/Windows7 PC environment | ||||||
UBoot | Boot method selection(eMMC) | |||||
RAM(1G) | ||||||
UBOOT boot-up LOGO(provided later) | ||||||
Linux kernel | Version Linux-3.0.35 | Support file systems in EXT4/NFS/FAT32/NTFS,etc format | ||||
Drivers | eMMC driver(4G/8G) | LCD backlight driver,adjustable up to 255-grade | ||||
Watchdogdriver | LCD driver(standard 7"LCD) | |||||
RTC driver | USB Host driver | |||||
I/O driver | USB Device driver | |||||
User key driver:4 | TF/SD/MMC card driver: up to 32GB | |||||
SPI driver | Serial port driver:4 | |||||
I2C driver | WM8962 audio driver | |||||
Camera driverOV5640 | Ethernet driver,(AR8031,1000/100/10Mbps) | |||||
PWM control driver | 3G driver | |||||
Capacitive touch driver | USB to serial driver | |||||
LVDS1/2-ch(1-ch support 1366×768 resolution,2-ch support 1920×1080 resolution) | SATA hard disk driver | |||||
APPs | WiFi config tool | Automactic mount and disconnect MMC/TF/SD card,U disk and SATA2ext4 hard disk | ||||
USB camera test | Access to Internet via GPRS | |||||
Telnet | GPS test | |||||
RTC test | Access to Internet via 3G | |||||
SPI to CAN MCP2515 | Recording and playing test | |||||
Flexcan | I2C test | |||||
IP/Mac address modification | GPU test | |||||
Sqllite database | IPU test | |||||
Sleep/awakening | VPU test | |||||
TTL to RS232 | Speaker test | |||||
RS485 test | RGB screen backlight adjustment | |||||
Watchdog test | 1080p videos and mp3 files play test | |||||
Recording/playing test | FTP network | |||||
Boa Web Server | SPI test |
Linux QT4.8.5 | ||||||
Cross-compiler | arm-fsl-linux-gnueabi-gcc-4.6.2 | ARMv7 architecture,support hard floating-point calculation | ||||
Flashing method | USB download flashing | USB one-key flashing | ||||
Single/multiple files automatic flashing | Support system files flashing inEXT4 format | |||||
Flashing tool:MFG tools, Support WindowsXP/Vist/Windows7 PC environment | ||||||
Boot method selection(eMMC) | ||||||
RAM(1G) | ||||||
UBOOT boot-up LOGO(provided later) | ||||||
Version Linux-3.0.35 | Support file systems in EXT4/NFS/FAT32/NTFS,etc format | |||||
eMMC driver(4G/8G) | LCD backlight driver,adjustable up to 255-grade | |||||
Watchdog driver | LCD driver(standard 7"LCD) | |||||
RTC driver | USB Host driver | |||||
I/O driver | USB Device driver | |||||
User key driver:4 | TF/SD/MMC card driver: up to 32GB | |||||
SPI driver | Serial port driver:4 | |||||
I2C driver | WM8962 audio driver | |||||
Camera driverOV5640 | Ethernet driver,(AR8031,1000/100/10Mbps) | |||||
PWM control driver | 3G driver | |||||
Capacitive touch driver | USB to serial driver | |||||
LVDS1/2-ch(1-ch support 1366×768 resolution,2-ch support 1920×1080 resolution) | SATA hard disk driver |
Structure dimensions: 130mm x 190mm
SOM is with hole of 49mm x 51mm
Artcraft: thickness: 1.6mm, 4-layer PCB
Power input: DC 5V(mandatory)+DC12V(auxiliary, only for 3.5'' hard disk and LVDS display)
Generally the board could be packed as one pc a box (24*19*10cm), the parcel(s) could be sent out by express/air within 3~5 working days after receipt of full payment.
1. We are an original manufacturer with our own R&D team, all of our products are designed by this excellent department, and also we kindly provide both OEM and ODM service
2. we are Freescale / TI Sitara IDH in China and we can provide customers with best products and service
3. Instant and professional after-sale technical support
4. More than ten years of experience in embedded industry
5. ISO9001 and CE&FCC certified