Technical parameters:
Ball diameter |
5mm (R2.5mm). |
Total test pressure |
20N±0.2N |
Samples bearining |
Diameter:50mm, Length:100mm; Solid stainless steel cylinder |
Production of materials |
all used Stainless steel materials |
Reference |
IEC60695-1,IEC60884-1,IEC60320-1, IEC60335-1,IEC60598-1,IEC60950-1. |
Remark |
Ball Pressure Instrument takes another a hot box (oven) supporting the |
Ball Pressure Apparatus is used for testing parts of nonmetallic materials for resistance to heat.
Ball Pressure Apparatus is the requirement ball(R2.5mm)and total test force20N±0.2N ball pressure testing device,special instrument for testing the heat resistance of non-metallic materials .
Application:
Ball Pressure Apparatus is used for testing parts of non-metallic materials for resistance to heat. It is applicable to electrical equipment, its sub assemblies and components, and to solid electrical insulating materials except ceramics. Ball Pressure Apparatus is the requirement ball(R2.5mm) and total test force 20N±0.2N ball pressure testing device , pressure level of the state and was placed in the heating chamber on the surface of the test.
The ball pressure test is a ball pressure tester that stipulates a steel ball (R2.5mm) and a total test force of 20N±0.2N, and presses it on the surface of the sample in a state of being placed in a heating box at the temperature specified in the sample. After 60 min + 2 min / 0 min, the test sample was quickly immersed in 20 ° C ± 5 ° C water for 6 min ± 2 min, and the diameter of the surface indentation of the test sample was measured within 3 min from the water, and the diameter of the indentation was more than 2 mm. The heat resistance of the sample at the specified temperature is evaluated.
Q1: How long is the delivery time?
A: 5 working days after we received your deposit or order confirmed.
Q2: What is the warranty for the equipment?
A: One year. We can provide you lifelong technical support.
Q3: What is the payment terms?
A: T/T, L/C, Western Union, etc
Q4: How about the products quality?
A: Our products apply to ISO, ASTM, GB, etc
Q5: Is it OK to print my logo on machine product?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q6. What is your terms of payment?
A: T/T 30% as deposit, and 70% before delivery. We'll show you the photos of the products and packages before you pay the balance.
or 100% L/C at sight .
Q7: Can we test sample before place order?
A: Of course,we can test sample and provide test report to you with free.
How To Contact Us?
Send Your Inquiry Details in the Below,Click "Send" Now!