1. Pressure cut off by software-Automatic pressure relief when the pressure increases over 55kPa in the chamber
2. Mechanical Pressure cut off-Safety valve (certified product) is installed to prevent the internal pressure from increasing over 60kPa
3. Emergency release switch-Quickly release the pressure from inside tor out side the chamber by operating one-touch type valve in case of emergency
4. Automatic emergency power off system- Automatic pressure relief in case of power failure or power off
5. Custom Controls- Profile fit with automatic pressure control treatment.
6. Graph-Designed to always check current treatment progress through graph
1. It detects temperature, humidity and carbon dioxide inside the chamber and displays it on the inside of the chamber, allowing automatic ventilation at all times.
2. Interphone can communicate internally and externally even in case of power failure or power off.
3. A wide transparent window allows the patient to be seen inside the chamber and eliminates patient frustration due to confined spaces.
4. 40L / min ~ 100L / min pressure valve can adjust the flow rate according to patient's condition
5. Easy installation and operation
O2 FRESH-M50 specification | ||||
Chamber | Usage | One Patient | ||
Operation Pressure | 10kPa ~ 50kPa(1.1~1.5ATA) | |||
Size | 2200mm * Ø800mm | |||
Weight | 125 KG | |||
Material | Aluminum | |||
System(Controller) Compressor+Air Cooler | Air volume | 100L / min | ||
Voltage | 220VAC / 50,60Hz | |||
Power Consumption | 950VA | |||
Size | (W)450mm * (D)642mm * (H)1095 mm | |||
Weight | 94 KG | |||
Material | Steel | |||
Oxygen Generator | Oxygen Volume | 1L ~ 5L/min | ||
Oxygen Concentration | 93 ± 3% | |||
Voltage | 220VAC / 50,60Hz | |||
Power Consumption | 270W | |||
Noise | 45db or less | |||
Size | (W)400mm * (D)300mm * (H)510mm | |||
Weight | 16.5kg | |||
Installation Space | (W) 3m * (D) 1.5m |