Hydro pulper machine for waste paper , old paper pulping machine
Introduction of pulper
Hydro pulper machine used for pulping all kinds of pulp board, damaged paper a-
nd waste paper. Vokes rotor deviates from the center so that make paper material and
rotor contact more quickly and frequently. Traditional Hydrapulper will produce a un-
impeded hydrocyclone,Paper material from inlet by spiral trajectory to the center of t-
he rotor in sports. However, D type hydrapulper change the way of the flow and mak-
e the paper material in touch with the rotor more quickly, which can shorten the paper
into pulp material handling time and improve the production capacity without any incr-
ease in power and volume.
Parameters of pulper
Type |
ZDSD23 |
ZDSD24 |
ZDSD25 |
ZDSD26 |
ZDSD27 |
ZDSD28 |
ZDSD29 |
ZDSD30 |
ZDSD31 |
ZDSD32 |
||||||||||||
Normal Volume(m3) |
5 |
10 |
15 |
20 |
25 |
30 |
35 |
40 |
45 |
50 |
||||||||||||
Concentration(%) |
3-5 |
|||||||||||||||||||||
Product capacity(t/d) |
30-50 |
40-90 |
80-120 |
140-180 |
180-230 |
230-280 |
270-320 |
300-370 |
350-400 |
400-450 |
||||||||||||
Motor power(kw) |
75 |
110 |
160 |
185 |
220 |
280 |
315 |
355 |
400 |
450 |
Features of pulper
D type hydrapulper is made up of "D" type tub, rotor device, outrigger, drive mechanism
and motor and other major parts.
(1)"D" type tub
"D" type tub welded together by steel plate. Flowing external channel steel is used for rei-
nforcing the tub. The guide plate located in the bottom of inner cone is used for prompting
pulp reflow so that formatting cycle.
(2)Rotor device
The rotor and the plasma disc is higher than the bottom of pulper groove plane, a low pres-
sure area will be formed around the rotor to gather heavy impurities. When the heavy imp-
urities deposit to the bottom, they will be taken to the sediment well or heavy slag collecting
tank due to the effect of rotation of the slurry, which can reduce the touch between the rot-
or and the impurities so that prolong the service life of the rotor and prevent the twisted rope
winding on the rotor in order to protect the twisted rope and rotor from being damaged.
Workshop
Service
1.We will provide you all technical consultation and make the draw and proposal for you.
2.We will send technicians to install and test the machine for you.
3.We will supply best after-sale service.
If you are interested in pulper, pls contact us. Don't hesitate.