Hydraulic compression dead end clamp NY-465/210 FOR Aluminum alloy core Aluminum strand wire

 Hydraulic compression dead end clamp and tension clamp and strain clamp characteristics description

1.product features
Hydraulically connected, the tensile tube and the wire become a whole, with sufficient mechanical strength and good electrical contact performance;

 2.structural characteristics
Executive standard
Meets the technical requirements of the DL/T 757 tensile clamp and IEC, BS, DIN AND GB AND ANSI Standard technical request.

Raw material
The body and the drainage plate are made of pure aluminum extrusion technology, and the material is dense; the steel anchor is made of hot-dip galvanized steel;

Connection method
The product is suitable for aluminum alloy core aluminum stranded wire. Our company has developed a series of conductors: steel core aluminum stranded wire, steel stranded wire, aluminum stranded wire, aluminum alloy stranded wire, heat-resistant steel core aluminum alloy stranded wire, aluminum clad steel Core aluminum alloy stranded wire, aluminum-clad steel stranded wire and other series of hydraulic tensile clamps;
With a hydraulic process, the pressure is constant and the connection is more reliable.

use
NY tensile clamp for fixing the wire or lightning conductor to the tensile insulator string of the non-linear tower, for anchoring, and for fixing the cable of the cable tower.

our workshop

our Product Photoes