We produce low-power, high pressure hydraulic automatic cattle&sheep licking salt block press machine
with high pressure and high accuracy. This press machine uses advanced mechanical, electrical, hydraulic and pneumatic control, with automatic feeding device, floating pressure, so that the density of molded products has been effectively controlled, hydraulic system uses advanced cartridge valve blocks, hydraulic machine to ensure continuous and frequent stability working; Mechanical stopper positioning and stepless adjustment mechanism of Loading, molding, demolding three-position to determine the stability, adjustable of the product’s geometry size. With oil fluid cooling device. PLC and man-machine interface centralized control, while equipped with a mechanical limit device to ensure product consistency.
Item | Unit | XY100 | XY200 | XY315 | XY400 | XY500 | XY720 |
Nominal pressure rating | kN | 1000 | 2000 | 3150 | 4000 | 5000 | 7200 |
Max liquid working pressure | Mpa | 25 | 25 | 25 | 25 | 25 | 25 |
Max distance from sliding block flat to workbench | mm | 1100 | 1100 | 1150 | 1200 | 1200 | 1200 |
Motor total power | kw | 7.5 | 15 | 22 | 30 | 30 | 45 |
Block weight | kg | 2 | 2-5 | 4-7 | 2-10 | 5-10 | 10-20 |
Composed of main hydrauliccylinder, material pushing hydraulic cylinder, bottom plate hydraulic cylinder,matching mould frame and mould, pressure head and so on.
Composed of motor, hydraulic pump, pump protection device,control valve, pipe system that used to connect block machine
Composed of electrical system and PLC control system.
1.Adopt the most advanced professional cartridge valve blocks, large flow path, save system pressure loss. Good seal performance, under long-term heavy load work condition the system also won't appear insufficient phenomenon; equipped with Preliminary unloading device, eliminate the hydraulic impact.
2.Use two-way floating pressure adding system, ensure the uniform density of blocks, make sure the high density of blocks; The block hole part adopt core pulling cylinder, make the hole edge smoothly and good looking.
3.Hydraulic cylinder are made of thick-wall seamless high strength alloy . In wall was honing by raw sandpaper and fine sandpaper by honing machine, ensure the cylinder in wall reach mirror surface, then make sure the good using performance.
4.Adopt PLC automatic control system, strong anti-interference ability and low failure rat.
Miniature relay adopt Japanese omron electric equipment, ensure the safety of control system.
5.Adopt professional mould frame, use Six guide pin to ensure accurate positioning, and equip mechanical position limitation, not only ensure the perfect outlook of pressed material also ensure the high quality.
6.Adopt advanced fast device, small calorific value, high productivity, durable and energy saving ( around 3.5 times per minutes)
These are regular mold salt blocks made by our machines, we are also able to make as per customer's special mold!
The salt block made by our machine, clean, strong and uniform size & weight.
Our oil tank equipped with a high efficiency condenser(cooler), which can keep the machine working normally for 10-12 hours continuously.
Generally, the mold material we use is mold steel after quenched processing, which can make the mold durable, and will not be rusted.
The best material we use for mold is 316 SS.
The blocks made by our machine are firmest and hardest. You are welcome to send inquiry to Alice for more videos about our machines.
* We have a professional technical team which can help you on installation and debug the machines on abroad.
* Engineers available to service machinery overseas.
* Friendly sales team welcome you to our factory any time.
* Testing machine personally