Hottest MDS sludge screw press machine replacing dewatering filter press
Hottest MDS sludge screw press machine replacing dewatering filter press
1. Unique Structure
BENENV's MDS101 Japanese quality self cleaning sludge dewatering screw press, is of unique dewatering structure with SS304 fixed and moving rings, which enables sludge dewatering machine automatically self-cleans the filter mesh to avoid clogging. MDS sludge dewatering machine is able to treat low-concentration sludg and oily sludge effectively, with low energy consumption and easy operation, realizing an energy -effectively sludge dewatering.
2. Advantages over Japanese quality self cleaning sludge dewatering screw press
(1)BENENV's MDS101 Japanese quality self cleaning sludge dewatering screw press is of unique dewatering structure with fixed and moving rings. It has many advantages over sludge dewatering decanter centrifuge especially for power and rinsing water consumption saving. Below is a comparison table between them under the same treatment capacity of 30kg-DS/hour.
|
Item |
MDS Japanese quality self cleaning sludge dewatering screw press |
Sludge Dewatering Decanter Centrifuge |
|
Low Concentration Sludge Dewatering |
Yes |
No |
|
24 hours auto running |
Yes |
No |
|
Footprint |
2.4 m2 |
4.32 m2 |
|
Power Consumption |
0.8 kW/h |
20.5 kW/h |
|
Rinsing Water Consumption |
0.064 m3/h |
2.5 m3/h |
|
Noise |
60 dB (Normal Talking) |
82.4 dB (Noisy Factory) |
|
Labor Intensity |
Low |
Normal |
|
Working Environment |
Clean |
Clean |
|
Maintenance |
Easy and Occasional |
Difficult |
(2)There are no easily blocked pieces such as belt and filtration pore in 24-hour Automatic sludge centrifugal dewatering machine. Combining with the auto control system, the machine runs very safely and simply and can be programmed according to the requirement of the users. It can operate automatically for 24 hours, unmanned.
3. Dewatering Principle of MDS101 Japanese quality self cleaning sludge dewatering screw press
MDS101 Japanese quality self cleaning sludge dewatering screw press is a new generation of sludge dewatering technology - a screw type sludge dewatering press It features clog-free, wide range of applications, low energy consumption, simple operation & maintenance.
4. High Efficiency auto clean sludge separator Process
MDS has solved several technical problems of other similar sludge dewatering machine including belt press, centrifuge, plate-and-frame filter press posses, like frequently clogging, low concentration sludge / oil sludge treatment failure, high energy consumption and complicated operation etc.
5. Application in Various Industry
Exclusive pre-concentration design, applicable for sludge of concentration from 2000mg/L to 50000mg/L. Besides, Due to the innovation of the structure design, it is highly suitable to oil sludge.
6.Client's voice
"I used to use a belt filter press for sludge dewatering, which caused frequent clogging and low dewatering efficiency, making my job very troublesome.
After the installation of MDS, the maintenance hours were tremendously reduced compared with the time when I had to spend a lot of time every day cleaning the belt filter, and we now have full automatic operation without an operator, making my job much easier."
Our Solution
|
Decanter Centrifuge |
MDS sludge dewatering |
|
|
Operating Mode |
Manual |
Automatic |
|
Maintenance For Washing |
Half Day |
Automatic |
|
Washing Water |
2.5 m³/h× Half Day |
40 L/h |
Result
|
Model |
MDS-101 |
|
Sludge Concentration |
5 % |
|
Sludge Flow Rate |
1.04 m³/h |
|
Active Polymer Consumption |
1.2 kg/ton-DS |
|
DS Throughput |
16.7 kg-DS/h |
|
Cake Solids Content |
20 % |
|
Solids Capture Rate |
97.5 % |
1,Company profile
Jiangsu Benenv Environmental Protection Technology Co., Ltd. is an environmental protection company, specialized in mechanisms, environmental engineering and other related science. With research center in Japan, we have factory and office in China.
2, Factory View
3,Our Clients
By 2015.06, 518 units of MDS101 Japanese quality self cleaning sludge dewatering screw press are installed in 37 countries!
Project References of MDS101 Japanese quality self cleaning sludge dewatering screw press
1. Why Choose BENENV?
1. BENENV has over 2 decades experience in sludge dewatering and sludge treatment.
2. We have Japanese expert for quality control, thus our product is far better than other Chinese manufacturers’.
3. We only use the best parts from best suppliers, such as Bauer, SEW, Schneider, Omron, etc.
4. We have our own RD center and complete manufacture system.
5. We have got CE mark and ISO 9001 certificates, rich experience in dealing with overseas markets.
2. How to select a suitable High Efficiency auto clean sludge separator?
1. what is your sludge treatment capacity per hour(m3/hr)?
2. What is your sludge solid content or moisture content(%)?
3. What is the sludge type?
4. What is the character of the your sludge?
5. What is the voltage?
6. How about the existing sludge treatment equipment you are using?
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier