Hot selling high frequency vacuum wood dryer machine biomass sawdust wood drying kiln
Hot selling high frequency vacuum wood dryer machine/biomass sawdust wood drying kiln
Introduction of wood sawdust dryer :
Sawdust dryer is widely used to dry wood sawdust, wood chips, rice husk, sugar cane bagasse, etc. which is the pre-processing for making pellet, briquette, biomass fuel, etc.
Working principle of wood sawdust dryer:
Rotary Dryer adopts direct flow type of heating with heat source from firing uint. The material to be dried is pushed back immediately by spiral board when enters the shell from feeding tank and feeding chute. Because the Rotary Dryer is installed in slope, material flows to the back end under gravity and rotation force, meanwhile, the Rotary Dryer lifted by board repeatedly and thrown down accordingly, which make the material from even curtain and exchange heat sufficiently with inner the heat flow. In the end, water in the material is dried by repeatedly scattering.
Technical Parameter of wood sawdust dryer :
|
Model |
GT650 |
GT800 |
GT1000 |
GT-1200 |
GT1500 |
|
Capacity kg/h |
600-800 |
800-1000 |
1200-1500 |
1500-2000 |
2000-2500 |
|
Main Power |
5.5kw |
7.5kw |
7.5kw |
11kw |
15kw |
|
Air lock power |
1.1kw |
1.5kw |
2.2kw |
2.2kw |
2.2kw |
|
Weight |
2600kg |
2800kg |
3800kg |
4500kg |
5000kg |
|
Diameter of roller |
0.68m |
0.8m |
1m |
1.2m |
1.5m |
|
Length of roller |
9m |
10m |
10m |
10m |
10m |
Structure of sawdust drying machine:
1, Fireplace is the place where the firewood, coal, gas or other material is burning for heat, there is a specially designed buffer which can make the hot air through but provent the fire in.
2, Loading place is beside the fireplace, thus the material can be dry at a early time.
3, Roller is running evenly to make the material drying and processing at the same time.
4, Discharging unit is installed with thermeter to control drying temperature. The temperature change of dryer's feeding end can be indicated by the thermometer to control the inner drier temperature ( generally 250-350°C)
5, The cyclone is for the discharging, whcih is more convenient and air lock for making the discharging little noise and no waste.
The whole line of making wood briquette charcoal
1.Crush the raw material into small pieces (diameter is about 3-5mm).
2.Dry the material by machine or dried it in the sun , till the moisture is less than 12%.
3.Put the material into feed let of briquette machine.
4.Produce the briquette stick from biomass material without any additive.
5.Carbonized the briquette stick.
Our wood briquette machine
our carbonization stove:
Gongyi Xiaoyi Mingyang Machinery plant is located in Zhengzhou.Henan province. Our machineryplant is specialize in WOOD BRIQUETTE MACHINE 26 years.
There have production line of makingwood charcoal briquette(including crusher , dryer , wood briquette machine, carbonization stove) ,
production line of making wood pellet (including crusher, dryer , wood pellets machine , dust separation plant and packaging machine)
production line of making coal ball briquette(includingvertical crusher, mixing machine, coal briquette pressing machine and dryer machine for coal briquette)
and other equipment such as screw conveyor, belt conveyor, scrap conveyor , sawdust carbonization stove, floating fish feed machine and so on.
Our machines have the best quality and we have got many certification such as CE, ISO, BV.
ave got many certification such as CE, ISO, BV.
We have the professional and experienced team to assist you; If there is any questions, please feel free to contact me, I am always here online waiting for your calling, also click the name card to get more information;
| Note | |||
|
Before we give you the professional recommendation, please confirm the following information: Requirement and specification: 1. name of the raw material ? 2. size&moisture of the raw material? 3. how many raw material you have one day? 4. how many hours you want to working per day? 5. what's the output you need? 6. what's the kind of the final product you need? ( the shape, diameter, length) 7. the usage of the final product ? 8. electrical supply in your place?
|
|||
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier