Thermoplastic Road Line Marking Paint Machine
Introduction
1. Paint barrels: double stainless steel heating insulation barrels, capacity 100 kg, plug-in manually mixer devices, removable devices.
2. Glass Bead storage box: 10 kg / box.
3. Glass beads beads sow browser: synchronous clutch spread with speed gearshift device.
4. Crossed Doo: High-precision ultra-thin material manufacturing, scraper-type structure, the standard configuration of 150 mm.Be exchangeable.
5. Landing knife: Carbide, with eccentric sleeve device can adjust the thickness of the scope marking :1-2.5 mm.
6. Tire: Alloy Wheel Unit, a special heat-resistant rubber, after the last round with positioning devices for the body along a straight line direction.
7. Heating method: liquefied petroleum gas.
8. Subscript Line Width: engineering requirements in accordance with the replacement of different specifications crossed hopper.
1.Technical data
Item No. |
DB-THP-I |
Paint tank |
55L |
Glass beads bin |
12L |
Heating mode |
Liquefied gas fue, infrared propone |
Marking equipment |
Manual screeding marking shoe,pressure casting, standard configuration150mm |
Knife underframe material |
carbon steel material |
Marking width |
100mm,200mm,250mm,300mm (at customers’option) |
Marking thickness |
1.8-3.0mm(adjustable) |
Dimensions (L*W*H) |
1210*890*970mm |
Weight |
165kg |
2.Main features
*More stable:
Through gravity adjustment, widened front wheel, the Marking Machine is more
stable than traditional ones when marking 450mm zebra crossing.
*Lighter:
Through repeatedly gravity test, rechoose new shaft, the marking machine is much lighter,
reduced operator’s working intensity. So the marking works is easier and more effectively.
*Easy to operate
Marking hopper’s operating range minimized from 300mm to 200mm, more accurately ,
easier to control, therefore such problems as slow hopper withdrawal and uneven finishing
mark edge are solved.
3.Availabe paint: Thermoplastic road marking paint
4.Equipped with thermoplastic road marking machine---pre heater
Road marking by our machines