The nail making machine is used to make nail production equipment.Nail machine, also known as waste steel nail making machine, it is in all from the use of waste energy efficient, turning waste into the treasure point of view, everything from the user can quickly get rich point of view, to economic practicality, to the technical content High, easy to use, it is small, energy conservation, stable and reliable performance. Quality to meet the standard, the device has a small size, flexible and easy to move, low noise, low power consumption, easy to install and so on. So the project has become the enterprise, individual, family, laid-off workers, farmers friends quickly get rich investment projects.
The Process Of Production Technology
Scrap steel ----- A + B-type drawing machine ----- nail machine (optional one) ----- polishing machine ----- packaging factory
Nail making machine is divided into four, the most important is the drawing.
Brushed - to buy after the nail to determine what kind of bar after the use of nails, such as new steel bars, scrap steel, etc.
Waste bar drawing more trouble, as new steel so fast, but the cost of waste steel it is very The finished product wire drawing, the speed is faster, eliminating some of the manpower. The speed of the nail is also very fast.
System - after the wire pull, through the automatic transmission line head, and then pull the wire and then send the head inside the machine to produce a good semi-finished products nails.
Polished - put the finished semi-finished nail into the polishing machine inside the polishing, polishing machine into the
sawdust, paraffin, gasoline and some chemical raw materials, after the impact of friction.
Packaging - the above three are important, the packaging can be based on the user's own needs from the tailored
1,feed:
Selection of the diameter of 8mm below the length of 10cm above the prefabricated field of the remaining waste head and the old
house removed scrap steel, cold drawn wire, waste electrode, plate round head as raw material.
2,the principle:
1, the first raw materials by the drawing machine drawing rust at the same time, pull into the size of your need to nail diameter;
2, and then into the nail making machine round nails; 3, into the polishing machine (adding raw materials) thrown into what you
need The brightness of the pour out; 4, metering packaging factory. (Can also be pulled into grid grid, cages, greenhouses,
hangers, car baskets and other aspects.)
3, parameters:
The machine can be used to produce 50 to 180 mm (2 inch, 2.5 inch, 3 inch, 4 inch, 5 inch, 6 inch, etc.) Replacement module to
produce different specifications of the round nail, working voltage 380 volts, 3 people operation, 20 square meters above the
primary school culture 1-2 days can learn, connected to the power can be put into production.
4, after-sales service:
1, technical support; management support; marketing support; service support.
2, to ensure that the door installation and commissioning; to ensure that the generation of technical personnel; to ensure
long-term supply of accessories; to ensure the normal production machinery.
Economic Benefit Analysis
Item Amount Price Amount (RMB)Monthly material 20 tons 3500 yuan / ton 70000 Electricity costs 2000 degrees 0.7 degrees 1,400 yuanLabor insurance supplies and equipment accessories 200 yuan / monthTax management costs 300 yuan Material loss of 20 kg / ton
2.5 kg / ton 1,000 yuan Workers wages 3 per person per month 600 yuan 1,800 yuanTotal cost of 74,700 yuanThe monthly production of 20 tons round nails, factory wholesale price of more than 4800 yuan / ton, total 96,000 yuan, excluding all the cost of 74,700 yuan, profit of 21,300 yuan this month, such as the expansion of higher production profits. Annual profit: monthly profit 21300 × (according to the October production calculation) = 213000 yuan. The above is for reference only, according to quarterly sales and local conditions vary.Products, technical parameters:Production range: length 9-38mm Diameter: 0.9-1.8mm Production: 450-500 / min
Maintenance items
First, do not adjust the work in the machine movement.Second, keep the machine clean, nail mold should always be cleaned, do not use raw embroidery wire nails.Third, after the start of the machine to be normal operation can be pulled into the line handle into the line nail, parking should stop before the line.Four, keep the nail knife sharp.Fifth, the machine should be observed during the operation of the friction parts of the temperature rise and abnormal sound of the occurrence.6, repair equipment or electrical appliances first disconnect the power.Seven, need to change the original application of equipment specifications.Eight, regular oil lubrication, to ensure that the lubrication part of the lubrication is good, the new machine use, in 15 days the best for a lot of lubrication.Nine, do not remove the case of the case of driving.
Advantage of Investment Nail Making Plant
1, nail machine investment risk: compared to the store business accidentally have the risk of losing money, the risk of opening
nail factory is almost zero, because even if the conversion midway, the remaining scrap also do not worry about selling.
2, the scale of investment can be large or small, urban and rural areas can invest: small-scale production only 50 square meters
can be simple factory shed. Urban residents to invest in nail making machine, you can choose in the suburbs abandoned old
factory,courtyard, the rent is very low; farmers to invest in their own courtyard can put into production. Compared to the store
business class of high rent, investment nail factory can save a lot of money.
3, the market profits are relatively stable: no matter how the market price changes, raw material prices, finished silk is bound
to follow up, raw material prices, finished silk will be followed by the relative, always can guarantee a certain processing
profit, and with China's construction market Increasingly developed, the market demand for products will be more and more.
4, raw materials easy to get, cheap, high profits: the use of scrap steel throughout the country (such as the demolition of
materials), scrap wire wire is still quite little, not being taken seriously, the price is low, so the profits will be relatively
high, the general local processing One ton can add more than 1,000 yuan