1. High efficiency: Induction power, heat transfers to the furnace in a short time.
2. Energy saving: Compared with traditional melting ways (gas & oil), saving 20%~30% power.
3. Easy and safe to use: All-round indicator lights controller, much safer and easier for workers to operate.
4. Stable in use: Our products have been tested at every level, reducing the rate of failure to a great extent.
5. Environmentally friendly: Electricity-powered, no air pollution, no dust and little noise.
6. Easy to carry and install: Portable, saving much more room.
The professional sales personnel will recommend a type of our melting furnace to you based on your job. The melting takes 20-30 minutes when the furnace is hot with its biggest melting capacity.
Model | LSZ-110 |
Working voltage | 3 phases 380V, 50/60HZ |
Output voltage | 70-550V |
Max input current | 160A |
Rated power | 110kw |
Oscillation frequency | 1-15KHZ |
Duty cycle | 100% |
Cooling water flow | ≥20/0.05L/Min, 0.2Mpa |
Weight | 410kg |
Control part dimension (L*W*H) | 760×400×880mm |
Transfer part dimension (L*W*H) | 550×300×500mm |
Melting capacity | 50kg steel, stainless steel, aluminum, aluminum alloy |
150kg copper, gold, silver |
The LSZ series induction melting furnace can melt the following material:
(1) iron, pig iron, cast iron;
(2) steel, stainless steel, cast steel, carbon steel and bearing steel;
(3) precious metal like gold, silver;
(4) copper, brass, bronze;
(5) aluminum, aluminum alloy;
(6) zinc, lead, tin, magnesium, nickel, titanium.
1. An ultra-small medium frequency induction heating power supply.
2. The top-up or dump type melting furnace.
3. The compensation capacitor box.
A: Yes, we have professional mineral separation team in this industry. Our engineers who perennial activities in South-east Asia, Eastern Europe, Africa and so on, they are expert at the Gold ore, Iron ore, Manganese ore, Tantalum & Niobium, Tungsten and other extraction production.
2. Q: Now we plan to make the production line separation and purification of this mineral. How to deal with it? What type of equipment we need to use?
A: According to mineral information and mining conditions from customers, our engineer design the best mineral processing line and the appropriate equipment to meet the specific needs of customers.
3. Q: If we give this order to your company, what kind of service you can offer?
A: First of all, if needed, our engineers will go to your mining site for field investigation to make the best designing scheme.
After the equipment arrived, we will send engineers to stationed in mine site to conduct the construction of the project, the installation and debugging and the staff training and ensuring the production are always working normally.
4. Q: The technology you designed need water? How much water it will need? What will do if there is a water shortage in our mine site?
A: For this kind mineral, we have dry and wet two different mineral separations. Our engineers will choice the best craft and equipments by the actual conditions that ensure the production line working normal in lack water or less water condition.
5. Q: What promises do you have about the quality of the equipment?
A: Warranty Time: one year. Meanwhile, we will provide a list of consumable parts, and can priority to provide you with adequate vulnerable parts.