Item | Emulsion paint |
Color | Can be custom |
1. Cover
Cover the furniture, floors, lamps, etc. in advance, so as not to deal with dust on the walls and dripping of paint.
2. Check
The surface of the wall must be flat. If there are holes, you can repair them with cement mortar.
3. Prepare
First, clean up the floating soil and dust. Then evenly roll the concrete interface agent, scrape the putty after it dries.
4. Scrape putty
Generally, the wall surface needs to be scraped twice, and the number of times can be adjusted according to the flatness. The time interval between each time is more than 2 hours.
5. Polish
After scraping putty for 1-2 days, all-round dust-free polishing,Check the flatness while polishing
6. Brush primer
cleaning the floating dust once again then brush the primer, one time is fine, be sure to be even. After 2-4 hours dry, you can proceed to the next step
7. Brush the top coating
The topcoat generally needs to be brushed twice. After the first brushing, wait 2-4 hours for it to dry before brushing it a second time. After the second brushing, it is expected to be 1-2 days after it is completely dry. Pay attention to waterproof, moisture-proof and sun protection.