2.NR360, NR400
3..B-HARD360, B-HARD400, B-.HARD450
4. KN-55, KN-60, KN-63
5.AR400, AR450, AR500, AR600
Welcome to TradeChina
Hot rolled BHNM550 BHNM600 BHNM650 NR360 NR400 B-HARD360 B-HARD400 overlay cladding wear resistant steel plate sheet board
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meorient Import & Export Co.LTD
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
Nearest Port
Hangzhou,Shanghai
Accepted Delivery Terms
Employees
5-10人
Accepted Payment Currency
USD,CNY
Average Lead Time
45 Day(s)
Certifications
Product Specifications
--Product Description
Product Description
Product Description
Abrasion Resistant (AR) steel plate is typically made in the as-rolled condition. These types/grades of steel plate products have been developed specifically for long service life in harsh conditions. AR products are suitable for a variety of applications in areas such as mining/quarrying, conveyors, material handling and construction, and earthmoving. Designers and plant operators choose AR plate steel when striving to extend service life of critical components, and reduce the weight of each unit put into service. The benefits of employing wear-resistant plate steel in applications involving impact and/or sliding contact with abrasive material are immense.
Abrasive resistant alloy steel plates generally offer good resistance to sliding and impact abrasion. The high carbon content in the alloy increases the hardness and toughness of the steel, making it an ideal material for applications that require high impact or high abrasion resistance. It is possible to get high hardness with a high carbon steel, and the steel will have good resistance to penetration. However, the wear rate will be rapid compared to heat treated alloy plate because high carbon steel is brittle, so particles can be more easily torn from the surface. As a result, high carbon steels are not used for high wear applications.
Specification | NM360 NM400 NM450 NM500 |
Technology | Hot Rolled |
Outer Diameter Size | 3/8" NB To 30" NB (Nominal Bore Size), A213 -3/8"OD To 5"OD |
Wall Thickness | 0.3mm-300mm |
Length | 12 Meters, 6 Meters, Single Random Length, Double Random Length And Customize Size. |
Dimension | All Pipes Is Manufactured and Inspected / Tested to the Relevant standards including ASTM, ASME, API. |
Tensile: | 58 to 71 ksi |
Yield: | 34 ksi min |
Elongation: | 19% min in 8” 22% min in 2” |
Wear Steel Standards
1.NM360, NM400, NM450, .NM500
Specification Range Wear Resistant Steel Plate
* Thickness: 8mm-300mm
* Width:1500mm-4020mm
* Length: 3000mm-18000mm
* Adopting standards: WYJ030-2005
* Dimensin,shape,weight and allowable deviation according to standards: GB709-88 or EN10029
* Supplied in the as-rolled condition: Q&T or Tempered
* Ultrasonic test: GB/T2970-91 or EN10160-1999
* Delivery time: 30-60 days
* Payment term: T/T or L/C
* Minimal order:1 pcs
* Width:1500mm-4020mm
* Length: 3000mm-18000mm
* Adopting standards: WYJ030-2005
* Dimensin,shape,weight and allowable deviation according to standards: GB709-88 or EN10029
* Supplied in the as-rolled condition: Q&T or Tempered
* Ultrasonic test: GB/T2970-91 or EN10160-1999
* Delivery time: 30-60 days
* Payment term: T/T or L/C
* Minimal order:1 pcs
NM360 Wear Resistant Steel
Gas Cutting Characteristics of NM360 Wear Resistant Steel
Gas Cutting Processing is allowed. Applying high pressure gas and low cutting speed to prevent split in cutting area. When cutting outside, preheating temperature 60 -90℃ in cutting area with flame spraying gun be recommended before the cutting.
Machining Characteristics of NM360 Wear Resistant Stee
Cutting and Shearing Property of the plate perform well. Proper feed amount and feed rate should be selected according to hardness of plate and cutting tool. The tools’ materials usually are high speed steel or cemented carbide, for cutting and polishing, carbide-coated tool is demanded.
NM400 Wear Resistant Steel
Cold-forming Characteristics of NM400 Wear Resistant Steel
Cold bending property of the plate is well although the high strength and hardness and also cold moulding process performs well.
To prevent crack at edge of plate at time of cold working, flame cutting edge or sheared edge need repair grinding in bending area.
To prevent crack at edge of plate at time of cold working, flame cutting edge or sheared edge need repair grinding in bending area.
Hot-forming Characteristics of NM400 Wear Resistant Steel
Hot-forming property of the plate performs well, the temperature of hot working should be less than 350℃. If the processing temperature of plate is more than transformation temperature (i.e. over AC) , low temperature tempering is necessary after hot working of the plate, tempering temperature is 250 - 350℃ (contrast with Sweden DILLIOUR400V steel, hot forming temperature increase by 150℃ )
NM450 Wear Resistant Steel
Wear-resistant steel NM450 is a high wear-resistant high-end varieties, with good cutting, bending, welding performance. Wear-resistant steel (Abrasion Resistance Steel ) is widely used in engineering, mining, construction and agriculture machinery products under extremely harsh working conditions with the requirement of high strength and high wear resistance, such as bulldozers, loaders, excavators, dump trucks and various mining machinery, etc. This kind of product has been mated for well-known domestic engineering machinery factories in mass as an ideal substitute of expensive imported wear-resistant plates.
NM500 Wear Resistant Steel
NM500 is a high-strength wear-resistant steel, which has a high wear resistance, Brinell hardness value reaches 500 (HBW) mainly in the need to wear the occasion or location to provide protection to the equipment longer life, reduced maintenance brought maintenance and downtime, and the corresponding reduction of capital investments.
Heat treatment: quenching and tempering (quenching and tempering).
NM500 wear-resistant steel is widely used construction machinery, mining machinery, mining machinery, environmental protection machinery, metallurgical machinery, abrasives, bearings and other product components.
Abrasion Resistant Steel Plate Applications:
The AR235 plates are intended for moderate wear applications where it offers improved wear resistance relative to structural carbon steel.
The AR400 are premium abrasion resistant steel plates that are heat-treated and exhibit through-hardening. Improved forming and weding capabilities.
AR450 is an abrasion resistant plate used in a variety of applications where slightly greater strength is desired beyond AR400.
AR500 plates are suitable for mining, forestry and construction applications.
AR600 is utilized in high-wear areas such as aggregate removal, mining, and the manufacture of buckets and wear bodies.
Abrasion Resistant (AR) steel plate is typically made in the as-rolled condition. These types/grades of steel plate products have been developed specifically for long service life in harsh conditions. AR products are suitable for a variety of applications in areas such as mining/quarrying, conveyors, material handling and construction, and earthmoving. Designers and plant operators choose AR plate steel when striving to extend service life of critical components, and reduce the weight of each unit put into service. The benefits of employing wear-resistant plate steel in applications involving impact and/or sliding contact with abrasive material are immense.
Abrasive resistant alloy steel plates generally offer good resistance to sliding and impact abrasion. The high carbon content in the alloy increases the hardness and toughness of the steel, making it an ideal material for applications that require high impact or high abrasion resistance. It is possible to get high hardness with a high carbon steel, and the steel will have good resistance to penetration. However, the wear rate will be rapid compared to heat treated alloy plate because high carbon steel is brittle, so particles can be more easily torn from the surface. As a result, high carbon steels are not used for high wear applications.
Related Products
Company Introduction
Tianjin Longford Meatal Products.,Ltd is a manufacturer of steel pipe , steel plate, copper tube, copper sheet, stainless steel tube, stainless steel sheet, steel bar, aluminum tube, aluminum sheet, steel beam with well-equipped testing facilities and strong technical force.
With a wide range, good quality, reasonable prices and stylish designs, our products are extensively used in mechanical manufacturing , metallurgical minerals , building materials, shipping, aircraft, automobile and other industries.
Our products are widely recognized and trusted by users and can meet continuously changing economic and social needs.
We welcome new and old customers from all walks of life to contact us for future business relationships and mutual success!
Our Services & Strength
Our company is located in the steel industry belt, close to Tianjin Port, many years of experience in steel industry sales, can represent customs declaration packaging and other services
FAQ
1.Are You Manufacture or Trade Company?
We are manufacture,we have 12 years experience for supply Metal material and products in domestic.
2.Can you supply what is the service?
We can supply the kinds of metal materials and products,and we also can supply other process services.
3.Can you supply the free sample?
We can supply the free sample,but the sample express freight should be by you.
4.What about your the fast lead time if we place order?
It is normal 7-10 days after receive your deposit.
5.Which payment terms can you accept?
We can accept the TT,Western Union now or Negotiation.
We are manufacture,we have 12 years experience for supply Metal material and products in domestic.
2.Can you supply what is the service?
We can supply the kinds of metal materials and products,and we also can supply other process services.
3.Can you supply the free sample?
We can supply the free sample,but the sample express freight should be by you.
4.What about your the fast lead time if we place order?
It is normal 7-10 days after receive your deposit.
5.Which payment terms can you accept?
We can accept the TT,Western Union now or Negotiation.
CONTACT US
WeChat：17720077032
Email：lfd001@ lfdmetal.com
WhatsApp：+86 17720077032
FAX：022-65670668
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier