Material: 80-120KG water, water temperature 60 degrees , dried sesame seeds 40-60KG, flake caustic soda 1-1.5KG
1. Add flake caustic soda to hot water, add sesame seeds and stir evenly, soak for 10-13 minutes, remove and drain
2. Add the drained sesame seeds when the peeling machine is turned on, and peel for 3-5 minutes.
3. Add about 1/3 of the water in the leather washing bucket to prevent the sesame peel from clogging the mesh. Turn on the operation, and then open the gate of the dehulling bucket. When the sesame seeds cannot be stirred out automatically, turn on the water valve to flush out the remaining sesame seeds.
4. Agitate the leather washing bucket for 5-10 minutes. After checking the obvious separation of the leather and kernel, slightly open the drain valve at the bottom, and open the water inlet valve by the same amount. Allow the sesame skins to drain with water. After about 5-10 minutes when the drain port is skinless, close the drain valve. Open the discharge gate.