Hot Sell RN 25 6 Vertical Gas Nitriding Furnace
NO. | ITEM | QTY |
1 | Furnace body(without foundation) | 1 set |
2 | Temperature control cabinet ammonia cabinet | Each 1 set |
3 | Intelligent schedule | 1 set |
4 | Thermocouple | 2 pieces |
5 | 1 Drip valve | 1 piece |
6 | Compensation conductor | 20m |
NO. | Item | Technical data |
1 | Rated power | 30KW,45KW,60KW |
2 | Power supply data | 3 phase 380V 50HZ |
3 | Rated temperature | 650℃ |
4 | Furnace temperature uniformity | ±5℃ |
5 | Chamber dimension(L*H) | φ450*650mm |
6 | Resistance wire material | Kangtai ersi, antioxidant |
7 | Furnace tank material and thickness | 316L 4mm |
8 | The temperature control precision | ≤±1℃ |
9 | Temperature control type | Adopt electrical intelligent list for automatic temperature control from Xiamen |
10 | Furnace cover drive mode | The electric wire rod lifting |
11 | Fan | Circulating fan |
1,Furnace body
Furnace body is mainly made of furnace shell, lining, heating elements, furnace cover, furnace cover lifting mechanism and the sealing system, furnace can, hot air circulation fan and drip liquid device, etc
2,Electrical Control Cabinet
2.1,The cabinet body adopt structural cabinet form, the framework inside cabinet is with universal mounting holes ,install galvanized hangs inside cabinet, hangs plate and cabinet surface adopt cold rolled steel sheet ≥2mm to be formed
2.2,Electric furnace is controlled by partition, each zone were respectively adopted PID intelligent high precision meter which to control temperature, high precision for temperature control , furnace temperature stable, small fluctuations on temperature difference
2.3,Settings for reasonable data by intelligent controller, which can be up to the optimal control of each temperature zone
2.5,Be with over*temperature, over-current, short circuit, break, furnace cover lifting.etc chain protection,
2.6,Alarm with sound and light alarm form, indicating which zones show over temperature
2.7,There is heating current instructions. to observe if heating of each zone is normal, when heat become slowly, it is for analyze the fault