Hot Sales Colored ketelong pc hollow sheet extrus line polycarbonate sheet 8mm hollow for build Greenhouse Skylight Carport

Characteristics of honeycomb solar panels:

(1) Transparency: The highest transmittance of honeycomb solar panels can reach 83%, which can be beautiful with glass. UV coated panels will not produce yellowing, atomization and poor light transmission under sunlight. After ten years, the loss rate of light transmission is only 10%, the loss rate of PVC is as high as 15%-20%, and the loss rate of glass fiber is 12%-20%.
(2) Anti-impact: the impact strength is 250-300 times that of ordinary glass, 30 times that of acrylic plate of the same thickness, 2-20 times that of toughened glass, and there is no crack when it falls two meters below 3kg hammer. It has the reputation of "non-breakable glass" and "sound steel".
(3) Ultraviolet protection: One side of honeycomb solar panel is extruded with anti-ultraviolet (UV) coating, the other side has anti-condensation treatment, which integrates anti-ultraviolet, heat insulation and anti-fogging functions. It can prevent ultraviolet rays from penetrating, and is suitable for protecting valuable works of art and exhibits from ultraviolet damage.
(4) Light weight: only half the weight of glass, saving transportation, handling, installation and support frame costs.
(5) Flame retardant: The national standard GB8624-2006 confirms that the honeycomb solar panels are flame retardant grade B. The burning point of honeycomb solar panel is 580 C. It extinguishes itself after leaving the fire. When burning, it will not produce toxic gases and will not promote the spread of the fire.
(6) Bendability: According to the design drawing, the cold bending method is adopted at the site, and the arch, semi-circular roof and window are installed. The minimum bending radius is 175 times the thickness of the plate, and it can also be hot bended.
(7) Sound insulation: honeycomb solar panels have obvious sound insulation effect, better sound insulation than glass and sub-afterburner panels of the same thickness. Under the same thickness, the sound insulation capacity of honeycomb solar panels is 5-9DB higher than that of glass. Internationally, it is the preferred material for Expressway noise barrier.
(8) Energy-saving: cool in summer, heat preservation in winter, honeycomb solar panels have a lower thermal conductivity (K value) than ordinary glass and other plastics, the thermal insulation effect is 7% - 25% higher than the same glass, and the maximum thermal insulation of P C solar panels is 49%. Therefore, the heat loss is greatly reduced. It is an environmental protection material for buildings with heating equipment.
(9) Temperature adaptability: honeycomb solar panels do not appear cold and brittle at - 40 C, do not soften at 125 C, and have no obvious changes in mechanical and mechanical properties in harsh environments.
(10) Weatherability: Honeycomb solar panels can maintain the stability of various physical indicators in the range of -40 ~120 ~C. The artificial climate aging test lasted for 4000 hours, the yellowing degree was 2, and the light transmittance decreased by only 0.6%.
(11) Anti-condensation: When the outdoor temperature is 0 C, the indoor temperature is 23 C and the indoor relative humidity is lower than 80%, the inner surface of the material does not condensate. Dew will run along the surface of the sheet and will not drip.
(12) Simple and convenient, not as bulky as traditional materials, which has been widely used in large cities in China in recent years. "

Use of honeycomb solar panel:

"The galleries and pavilions of gardens and recreational places with strange decorations and rest places;
The interior and exterior decoration of commercial buildings and curtain walls of modern urban buildings;
High-grade interior decoration materials such as walls, roofs and screens;
Sound barrier of Expressway and urban elevated road;
Agricultural greenhouse and aquaculture greenhouse;
Modern ecological restaurant roof;
Bicycle shed, balcony sunshade awning and roof lounge shed in all units or residential areas;
Lighting roofs for office buildings, Department stores, hotels, villas, schools, hospitals, stadiums, entertainment centers and public facilities, etc."

Packing Details  : Two side with PE film,Plastic paper packed

Delivery Details : 3-30 days after deposit

A: We are factory.

A: 7 to 10 days after your deposit

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.

A:  30% T/T in advance ,balance before shippment.