A hydrocyclone has two exits on the axis: the smaller on the bottom (underflow or reject) and larger at the top (overflow or accept). The underflow is generally the denser or thicker fraction, while the overflow is the lighter or more fluid fraction. Centrifugal pump is used to pump the drilling fluids from mud tank into the set of hydrocyclones. RL solids control has Flexible options for 1,2 or 3 hydrocyclone desander for different capacities and desilter has flexible options for 8 or 10,12,16 hydrocyclone for different capacities. Desander is installed after shale shaker and degasser but before desilter. Desander removes those abrassive solids from the drilling mud which cannot be removed by shale shakers.
· Optional polyurethane and high chrome cast iron
· Clamp and flange connection way
· Customizable size and dimension
· High efficient separation
· Durable enough lower maintenance cost
· Easy connection and replacement
· More adaptable for various capacity
· Better performance on solids removal
Model | Inner diameter(mm) | Feed pressure(MPa) | Treating capacity(m³/h) |
FX50 | 50 | 0.1~0.6 | 2~5 |
FX75 | 75 | 0.1~0.6 | 4~10 |
FX100 | 100 | 0.1~0.4 | 8~20 |
FX125 | 125 | 0.1~0.8 | 8~20 |
FX150 | 150 | 0.08~0.3 | 14~35 |
FX200 | 200 | 0.06~0.3 | 25~40 |
FX250 | 250 | 0.06-0.3 | 40~80 |
FX300 | 300 | 0.06~0.2 | 45~90 |
FX350 | 350 | 0.06~0.2 | 70~160 |
FX400 | 400 | 0.06~0.2 | 100~170 |
FX500 | 500 | 0.04~0.2 | 140~240 |
FX660 | 660 | 0.04~0.15 | 260~450 |