Hot Sale Manual Bottle Filling Machine Distilled Water Device Empty Mineral Water Bottle Price
Hot Sale Manual Bottle Filling Machine
Distilled Water Device Empty Mineral Water Bottle Price
Products Introduction
This Full Automatic Plastic Bottle Water Filling Machine used to produce polyester bottled mineral water, purified water, alcoholic beverage machinery and other non-gas beverage machinery.Beverage Machinery can finish all the process such as washing bottle, filling and sealing, it can reduce the materials and Outsiders touch time, improve the sanitary conditions, production capacity and economic efficiency.
The Complete Bottled Mineral Water / Pure Water Production Line used in the beverage filling operations. The three functions of bottle wash, fill and seal are composed in one body of the machine. The whole process is automatic.
Main Features
1. Using the wind sent access and move wheel in the bottle directly connected technology; canceled screw and conveyor chains, this enable the change the bottle-shaped become easier.
2. Bottles transmission adopt clip bottleneck technology, bottle-shaped transform not need to adjust the equipment level, only change related the curved plate, wheel and nylon parts is enough.
3. The specially designed stainless steel bottle washing machine clip is solid and durable, no touch with the screw location of bottle mouth to avoid secondary pollution.
4. High-speed large gravity flow valve filling valve, filling fast, filling accurate and no liquid lose.
5. Spiraling decline when output bottle, transform bottle shape no need to adjust the height of conveyor chains.
6. Host adopt advanced PLC automatic control technology, the key electrical components from famous company such as Japan's Mitsubishi, France Schneider, OMRON.
Technical Parameters
| Model | CGF16-12-6 | CGF18-18-6 | CGF24-24-8 | CGF32-32-10 | CGF40-40-12 |
| Production capacity(500ml) | 2000-4000 | 4000-6000 | 6000-8000 | 12000-15000 | 16000-18000 |
| Filling precision | ≤±5mm(liquid level) | ||||
| Polyester bottle standard(mm) | Bottle neck40-80 | Bottle neck: 50-100 bottle height:150-320 | |||
| Suitable cap shape | Plastic screw cap | ||||
| Water pressure of washing bollte(MPa) | 0.18-0.25 | ||||
| Water consumption for water bottle(kg/h) | 800 | 1600 | 2500 | 3000 | 1000 |
| Spraying positon | 5 | 5 | 6 | 12 | 5 |
| Dripping bottle position | 3 | 3 | 3.5 | 7 | 8 |
| Gas source pressure | normal pressure | ||||
| Gas consumption (m3/min) | 0.3 | 0.3 | 0.4 | 0c.5 | 0.6 |
| Total power(kw) | 4.23 | 5.03 | 6.57 | 8.63 | 9.63 |
| Total weight | 2000 | 3500 | 5500 | 6000 | 8000 |
| Dimension(L*W*H) (mm) | 2100*1500*2200 | 2450*1800*2200 | 2750*2180*2200 | 3500*2200*2250 | 3500*2200*2250 |
Machine Details
The equipment is used for the production of mineral water,pure water, alcohol drink, juice, etc normal temperaure filling.
It integrates washing ,filling ,capping together.The design is scientific and reasonable ,It's oppearance is beautiful ,operation and maintentic is convenient.,
Rinser-Filler-Capper 3 in 1
Washing part of the mineral water bottle filling machine
a) Rotary pan is made of stainless steel 304(or change to 316 according to your request).
b) The rubber clamp splice sizes the mouth of bottles, which is fixedness and reliable.
Filling part of the mineral water bottle filling machine
a) Rotary pan is made of stainless steel 304 (or change to 316 according to your request )
b) The way of filling is gravitation filling.
c) The filling valve is adopted best stainless steel 304 (or change to 316 according to your request )
d) The structure of filling valve is reasonable, the amount is correct
e) When filling the bottle, the bottle is move but the valve is stationary. The splint of bottle-neck seizes mouth of bottles. The elevator device with the action of gear realize the up and down of bottle
Capping part of pure water bottle filling machine
Capping machine is one of the highest precision machines, which greatly affects the reliability of device and the defective rate of product. The characteristic is as follows:
a) The dropping cap guide track fixes the device which can protect the cap from turning over and also set the device which can take out the inverse cap, equip a photo electricity switch which can stop the machine when lacking the cap and also avoid the situation that there is bottle without cap.
b) The bottle inlet switch which is set in the capping machine, with the locking cap which is the connection of the dripping cap guide track and dialing cap pan controls the discharging of cap, making sure that stop conveyor cap when there is no bottles ,avoid the waste of cap.
Cap feeder
Machine Details
Related Products
1.water treatment plants in our workshop
2.packaging system plants in our workshop
Package Type : As usual, we adopt wooden case as package type. It's suitable for long-distance transport. According to customers' special demand, we could adopt sheet iron case and so on.If container is too tigher,we will use pe film for packing or pack it according to customers special request.
Transport : By sea.
Advantage
|
Design Ability |
All the machines designed by CAD |
|
Manufacturing Ability |
Mechanical parts: high quality stainless steel, processed by CNC |
|
Reliability |
Electrical parts from world famous suppliers |
|
Professional |
Focus on beverage and pharmaceutical packing machines Exported to over 45 countries with good reputation 8 years Alibaba Golden supplier without complaint |
|
Good Service |
Service include complete production line design, manufacturing, on-site installation & aftersales maintenance. |
|
Export Experience |
Exported to over 45 countries, with good reputation. |
|
Profession on Export |
Authorized import & export licence. |
Installation service
When you finish the Preparation conditions,our fast and professional aftersales service engineer team will go to your factory to install the machine,give you the operating manual,and train your employee until they can operate the machine well.
The sample service
1.We can send you the video of the running machine.
2.You are welcome to come to visit our factory,and see the machine running.
Customized service
We can design the machines according your requirements(materil,power,filling type,the kinds of the bottles,and so on),at the same time we will give you our professional suggestion,as you know,we have been in this industry for many years.
Certificate
Zhangjiagang Jiayuan Machinery Co.,Ltd is a professional beverage machinery manufacturer, we dedicate ourselves to provide you the best machine with best price.
We can provide beverage production line as below:
1. Complete minereal/purewater production line;
2. Complete carbonated beverage production line;
3. Complete juice production line;
4. 5 gallons water production line;
5. Canning beverage production line;
6. Glass bottle beer production line;
7. Milk/tea filling&package line;
8. Oil filling&package line;
If you are interested in the product, you are highly welcome to send me emails for more specifications and videos!~ Looking forward to your inquiry.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier