Hot Sale Large Industrial Electric 20 HP Firewood Processor Wood Chipper Machine

Hot Sale Large Industrial Electric 20 HP Firewood Processor Wood Chipper Machine

Product Description 

First, the installation and commissioning of the branch shredder:

1. Before using the new machine, first open the upper cover to check the distance between the moving and fixed knife and the knife. The gap between the movable knife and the fixed knife is 0.2mm-0.3mm.

2. Check if the screws of each part are tightened.

3, the host pulley and the power pulley must be on a flat surface, after the belt is good, the elastic adjustment should be moderate, not too loose or too tight.

4. Before starting the machine, you can turn the pulley by hand. There should be no friction and collision during the rotation. Finally, start up and check the running direction before normal production.

Second, the causes of common failures and troubleshooting of tree shredders

A. Exclusion method:

1. Large discharge: the gap between the movable knife and the fixed knife is too large.

2, the machine shakes a lot: should check whether the screw is loose, the machine is placed flat.

B, branch shredder operation notes:

1. For each to two shifts, inject a butter into the oil line of the bearing cap.

2, the operator is better to stand sideways, hands can not enter one-half of the feeding port, to prevent weeds from getting around.

3. There must be no metal or sand.

4. No matter the fault occurs, the machine can't be put in before the machine is stopped. Otherwise, the consequences will be conceited (the machine should be turned off and then checked).

5, it is strictly forbidden to have long hair without a cap, hands and feet are not flexible, brain disabled, minors and drunks operate this machine.

6. It is strictly forbidden to forcibly feed by hand.

Technical Parameters 

Product Details