Hot Sale 5 stage RO reverse osmosis water filter system purifier/household water machines/intelligent water purifier
Hot Sale 5 stage RO reverse osmosis water filter system purifier/household water machines/intelligent water purifier
Model | DM-75G-E4 |
Power | 36W |
Rated voltage/frequency | 110V-220V, 50/60HZ |
Output Capacity | 283L/Days |
Water pressure | 0.1-0.6Mpa |
Feed water temperature | 5-45℃ |
Treatment stages | 5 stages (Also can be added in mineral,alkaline,UV light) |
| 1st Stage | 10" PP 5 micron filter, Clear filter housing |
| 2nd Stage | 10" GAC carbon filter, White filter housing |
3rd Stage | 10" CTO carbon Block Filter, White Filter Housing |
| 4th Stage | RO membrane 50GPD / 75GPD/80GPD |
5th Stage | 10" in-line post carbon cartridge |
Pressure tank | 3.2G or 4.0G Plastic tank or steel tank |
| Filter Housing | Double O-ring filter housing |
| Booster Pump | 110V or 220V / 24V / 1.5A with Transformer |
| Faucet | Press-handle gooseneck faucet 1/4" or Three-way Handle Long Reach Faucet 1/4" |
| Fittings type | Quick fittings |
Other parts | Solenoid valve 1/4'' or Auto Shut-off Valve 1/4'' |
High pressure switch, Low pressure swith | |
| 1/4" tubing for system connection | |
| Feed water connector, 1/4" ball valve | |
| Drain water clip | |
| Each components have been passed 10,000 times strict cycle testing |
Color | White or silver |
Packing | 590*430*340mm |
Filter Cartridge Lifetime:
Stage 01--5 micron PP cotton filter: 4 tons, replace in 6 months
Stage 02--particle coconut activated carbon: 4 tons, replace in 6 months
Stage 03--1 micron PP cotton filter: 8 tons, replace from 6 to 12 months
Stage 04--reverse osmosis membrane: 28-36 tons, replace in 3 years
Stage 05--post inline coconut activated carbon: 8 tons, replace from 6 to 12 months8 tons
DM-75G-D4
Five stage standard RO water purifer
mineralaikaline/UV light added availabie
1.Fiter changing alarm TDS display
2. Auto Flush,with lovely dust cover
3 RO water output50Gl75G80G/100G/125G
4Housing:double *O" ring housing
5. quick ntting
6. Dengyuan pump with adaptor 110V1220V 50/60Hz
7. RO membrane sheet trom USA
8.pressure tanke3 2G
9. white and silver color can be chosen
10. unit packing dimension 590430340mm
Precautions:
(1) Never place the water purifier in a direct sunshine
(2) Move the machine carefully and lightly.
(3) The water purifier shall operate at a temperature of 5-42°c,,and must not filter hot water,otherwise this may cause damage;in winter,pay attention to heat preservation and
protect against freeze.
(4) By using a cloth dipped in water,clean the water purifier with soft detergent rather that strong
volatile solvent such as gasoline
(5) In case of failure,disconnect the water source promptly,and see the introduction or ask us.
(6) In case of Long-term no use.pull the power plug,close the feed ball valve and cut off the water
source.
(7) In the cases where the water purifier is used for the first time or resued after long time idle
drain out the first two tanks of water through the goosennect tap after the tank is full,and then
use the machine.
(8) Don’t use a power supply that does not match the related voltage
1. Q:Are you manufacturer ?
A:Yes, we are manufacturer with continuous and improved R&D, production, sales
and service supply of water purifier and RO membrane. Our factory located in shanghai.
2. Q:What’s your main products ?
A: We mainly manufacture Reverse Osmosis products including household,
commercial RO system and RO parts,RO membrane.
3. Q: Can I get your price list ?
A: Yes, sure. In order to send you our available offered price, please choose
the products and let us know the product model and requirement in detail.
4. Q: What’s your payment policy?
A: Samples(Less than 3000USD): 100% in advance via T/T or West Union Formal order: 30% payment in advancevia T/T as deposit payment and 70% balance payment via T/T before delievery.
5. Q: Can I get your products with our logo and design ?
A: Yes, the Main water Purifier can have your own Logo and design, including packing design.
products are OEM or ODM with your logo and brand .
6, Q: How can I place an Sample order.
A: for Sample, you can choose an product and then place order, need to pay full amount for product and shipping.
Sample will take 1-3 days for shipment after payment. We can ship by DHL, UPS,Fedex and shipping takes 3-6 business days.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier