Hot Sale Zinc Alloy Lag Screw Shield Anchor,
with Fast Delivery
Size: 3/8X2 1/2"
Surface Treatment: Plain
Packing: 50 pcs per box, 6 boxes per carton
Specifications Model
Below sizes can be supply at any time
SIZE |
DRILL DIA. |
LENGTH |
THREAD LEN. |
1/4"Short |
1/2" |
1" |
1/2" |
1/4" Long |
1/2" |
1-1/2" |
1" |
5/16"Short |
1/2" |
1-1/4" |
3/4" |
5/16" Long |
1/2" |
1-3/4" |
1" |
3/8"Short |
5/8" |
1-3/4" |
1" |
3/8" Long |
5/8" |
2-1/2" |
1-1/2" |
1/2"Short |
3/4" |
2" |
1-1/8" |
1/2" Long |
3/4" |
3" |
1-7/8" |
5/8"Short |
7/8" |
2" |
1" |
5/8" Long |
7/8" |
3-1/2" |
2-1/4" |
3/4"Short |
1" |
2" |
1-1/8" |
3/4" Long |
1" |
3-1/2" |
2-1/4" |
Installation Instructions
1. Using a hammer drill and a carbide-tipped masonry bit, drill a hole of recommended diameter into the base material. The hole depth should be equal to the length of the lag shield anchor plus one half inch (1/2") or more.
2. Clear the hole of all debris.
3. Place the lag shield anchor, ribbed end first, into the hole. Tap the lag shield with a hammer until it is flush with the surface of the base material.
4. Position the fixture to be fastened over the shield in the base material, insert the lag bolt through the fixture and into the shield, and tighten.
NOTE: If the lag screw begins to torque-up or tighten before the head of the lag screw mates up against the object being fastened, the shield should be driven deeper into the hole by hand hammering the head of the lag screw until flush to the object being fastened. Re-tighten the lag screw to complete the expansion of the shield and to secure the material being fastened.