Key Specs
Model | Voltage | Open Flow (GPM/LPM) | Control Type | Max Draw | Shut-off Pressure (PSI/BAR) | Valves | Diaphragm | Ports | Wire Connections |
NMDP21-G10-40-12 | 12V | 1.0 / 3.8 | Switch | 4.0A | 40 / 2.8 | EPDM | Santoprene | 3/8" Barb | 2-Pin/Leads |
NMDP21-G10-40-24 | 24V | 1.0 / 3.8 | Switch | 2.0A | 40 / 2.8 | EPDM | Santoprene | 3/8" Barb | 2-Pin/Leads |
NMDP21-G11-70-12 | 12V | 1.1 / 4.0 | Switch | 4.0A | 70 / 4.8 | EPDM | Santoprene | 3/8" Barb | 2-Pin/Leads |
NMDP21-G12-35-12 | 12V | 1.2 / 4.3 | Switch | 4.0A | 35 / 2.4 | EPDM | Santoprene | 3/8" Barb | 2-Pin/Leads |
NMDP21-G12-35-24 | 24V | 1.2 / 4.3 | Switch | 2.0A | 35 / 2.4 | EPDM | Santoprene | 3/8" Barb | 2-Pin/Leads |
Custom Service: Bar-cording, Packaging, Label / Logo, Instruction, Color, etc.
Pump Design: | |
Type: | Positive Displacement 2 Chamber Diaphragm Pump |
Ports | 3/8" Hose Barb (10 mm) |
Liquid: | 140°F (60°C) |
Dry-Prime: | 4 feet (1.2 m) |
Run Dry: | Capable for Normal Workloads 5 Minutes |
Electrical: | |
Motor: | Permanent Magnet, Intermittent Duty |
Protection: | Thermal Overload Start on 239 °F(115° C), Automatic Restart |
Voltage: | 12/24 Volts DC |
Leads: | 18 AWG, 14" (35cm) long with 2-Pin connector/Leads |
Fuse: | 6.0 Amps Automotive |
Current: | 4.0 Amps Max |
Control: | Shut-off Pressure35 PSI: 25 PSI ±5 PSI (±0.3 bar) |
Materials of Construction | |
Housings: | Polypropylene/ Nylon |
Valves/Seals: | EPDM |
Diaphragm: | Santoprene |
Hardware: | Stainless Steel Fasteners, Zinc Plated |
Agency Approvals: |
CE |
Note: Do NOT use any Newmao pump for petrol gasoline, petroleum products, solvents, thinners or any other flammable liquid with a flash point below 82 C (180 F). This pump requires a round cable. Warranty: 1 Year.