Hot Press Molded Sectional Water Storage Tank With Fiberglass Material
Sectional Water Tank Introduction
FRP water tank is made of fiberglass reinforced plastics which is divided in FRP Modular Type and SMC combination type. The major advantage is light weight, anti-rusted, non-leakage, long durable
time and easy to clean. It’s widely used in hotel, school, hospital and coal mine enterprise.
Internal Reinforced System
External Reinforced System
Sectional Water Tank Panel Thickness
Tank Height | Thickness of each panel | |||||
bottom panel | 1st layer side panel | 2nd layer side panel | 3rd layer side panel | 4th layer side panel | cover panel | |
1m | 10mm | 10mm | / | / | / | 5mm |
2m | 12mm | 12mm | 10mm | / | / | 5mm |
3m | 16mm | 16mm | 12mm | 10mm | / | 5mm |
4m | 18mm | 18mm | 16mm | 12mm | 10mm | 5mm |
Sectional Water Tank Physical and Chemical Properties
Item | Performance index |
Tensile strength,Mpa | ≥60 |
Bending strength,Mpa | ≥100 |
Bending modulus,Gpa | ≥7.0 |
Pap hardness | ≥60 |
Bibulous rate,% | ≤1.0 |
Glass fiber content,% | ≥25 |
Sectional Water Tank Performance
Item | Requirements |
leakage | No leakage after filled with water |
Full of water deformation | Filled with water, wall maximum deformation after no more than 1.0% of the tank bottom center height, no more than 10 mm maximum deformation |
Water quality | Accord with GB5740 |
Sectional Water Tank Advantages
- Increased system durability and reliability
- Corrosion resistance
- Easier assembly
- Eliminated need for panel maintenance
- Easier tank maintenance
- Reduced heat transfer to the water
Sectional Water Tank Applications
1). Potable drinking water storage
2). Rainwater storage
3). Emergency water Storage
4). Pump chambers
5). Hospital, buildings, building site, school and other place
Sectional Water Tank Accessories
Internal accessories:
Inside ladder, flange, lacing wires, support, lacing wires board;
External accessories:
Outside ladder, fixing angle iron, auxiliary angle iron, rubber strip, plugging, silicon glue, bolts and nuts;
For FRP water tank accessories, usually have three specifications.
•Stainless steel 304/316;
•Hot dipped galvanized steel (HDG);
•Cold dipped galvanized steel (CDG);
FRP Panel
Lacing Wires
Reinforced Angle
Sectional Water Tank Installation Step
Step 1. Install steel footings on leveled concrete foundations.
Step 2. Align GRP panels to be pre-assembled.
Step 3. Place rubber sealant from ready-to-use roll between panels.
Step 4. Connect panels with bolts and nuts.
Step 5. Position bottom panel sections, and finish up base of tank.
Step 6. Position three sides of the tank.
Step 7. Position and fix top panels and if required, top support pipes and plates.
Step 8. Install reinforcement if required.
Step 9. Close up the tank with the fourth side.
Step 10. Finish the internal or external reinforcement.
Step 11. Fill and test.
Cautions:
1. Please do not store water higher than 70 °c or other liquid (chemicals, oil and so on).
2. Keep away fire.
3. Prevent pollutants and plunges from outside.
4. Use soft apparatus to clean. As to the new water tank, clean twice before use.
Sectional Water Tank Production Equipments
Rain Water Tank Packaging & Shipping
1. Any inquires will be replied within 8 working hours.
2. Professional FRP products manufacturer, welcome to visit our factory.
3. High quality, reasonable & competitive price.
4. Fast lead time, we are near Tianjin Port
5. Payment: we usual accept payment by T/T and western union.
6. We have strong cooperation with forwarder, you also can chose your own shipping forwarder.