Horizontal crawl full hydraulic KL511 magnetic rock mining drill machine
Horizontal crawl full hydraulic KL511 magnetic rock mining drill machine
1. Specification of Horizontal crawl full hydraulic KL511 magnetic rock mining drill machine
Kaishan brand KL551 Open-air full hydraulic drilling rig is equipped with standard 51 mm diameter drill
rod, can drill 89-127mm vertical and inclined and horizontal hole. Widely used in cutting excavation,
pipe laying, foundation engineering and the drilling in open-air mining.
KL511 equipped with heavy-duty hydraulic top hammer drill (23.4 KW). With its powerful rotary torque
impact power, Match enough washing ability and advanced control system, make it is fully capable of
in complex strata conditions exert its performance.
It is with 0-180°rotating ability of drilling rig’s frame, make a positioning drill coverage of 26.5 square
meters, greatly improve the efficiency of the rig's arrangement of holes and the ability to deal with
complicated working condition.
Drilling rig adopted high efficiency Kaishan brand screw air compressor , environmental protection and
energy saving, with completely independent intellectual property rights.
Drilling rig's power unit cross at the end of the upper rotary frame, as opposed to the drill arm and push
beam. No matter drill arm and push beam in any direction all have the effect of mutual balance.
Drilling rig's motion, crawler levelling and frame rotary can optional wireless remote control to operate
outside the cab.
2. Parameters of Horizontal crawl full hydraulic KL511 magnetic rock mining drill machine
Dimensions and Weight | Transportation dimensions (L*W*H) | 11100*2520*3320mm |
Weight | 15000kg | |
Articulated drill boom and chassis | Ground Clearance | 420mm |
Rotary Angle of Frame | 120°+60° | |
Drilling Area | 26.5m2 | |
Track Leveling Angle | 10° up, 10° down | |
Driving Speed | 0-3.5km/h | |
Grade Ability | 30° | |
Traction Force | 120kN | |
Power Unit | Diesel Engine | Caterpillar C7 |
Cylinder Quantity | 6 | |
Output Power | 168kW/2200rpm | |
Transmission Model | Gear box | |
Hydraulic Pump | 2×variable piston pump +2×gear pump | |
Screw Air Compressor | Zhejiang Kaishan | |
Air Displacement | 10mm3/min | |
Working Pressure | 10 bar | |
Oil Tank | 350L | |
Dust Collector System | Dust Collector Ability and Vacuum Degree | 23m3/min, 1000mm H2O |
Filter Element/Material | 13pcs/Fiber | |
Filter Area | 10m2 | |
Hydraulic Motor Power | 12kW | |
Hydraulic Rock Drill | Model | HC170RP |
Impact Power | 23.4kW | |
Max. Impact Pressure | 180 bar | |
Impact Frequency | 41Hz | |
Max. Torque | 1590Nm | |
Max. Rotary Pressure | 200 bar | |
Max. Rotary Speed | 130rpm | |
Shank Lubrication | Air/oil fog/electronic lubrication pump | |
Lubricating Oil Consumption | 115 drip/min | |
Drilling Diameter | 89-127mm | |
Hydraulic System | Driving, Drilling | Load sensing |
Filter Precision | 10μm | |
Cooling Ability | +50° environmental temperature | |
Hydraulic Oil Tank | 200L | |
Drill Boom, Propulsion Beam and Drill Rod Replacement Mechanism | Drill Boom Rising | 83° |
Folded Boom Rising | 87° | |
Carriage Swing Angle | -56°/52°, -20°/94° | |
Carriage Inclination Angle | 125° | |
Compensation Length | 1353mm | |
Rock Drill Stroke | 4020mm | |
Max. Propulsion Force | 19kN | |
Propulsion Way | The motor-roller chain | |
Economic Drilling Depth | 22m | |
Drill Rod Connecting Method | Automatic connecting and discharging | |
Drill Rod Quantity | 5+1 | |
Drill Rod Model | C51-52R-C51-3660 | |
Push length for one time | 4020mm | |
Drill Rod Thread Lubrication | Standard | |
Control System | Driving Control | Hydraulic pilot + wireless remote |
Drill Boom Control | Hydraulic control | |
Drilling Control | Pilot control (electric/hydraulic) | |
Hole Control | Stepless | |
Impact Control | Impact pressure control | |
Anti-Blocking Mechanism | Hydraulic | |
Voltage | Direct-current 24V | |
Cab | Safety | Fits the standards for preventing rock falls |
Indoor Noise dB | < 85dB | |
Control Function | Drilling, driving, drill boom action and drill rod replacement | |
Chair | Adjustable | |
Air Conditioner | Standard cooling and heating | |
Entertainment | Radio+MP3 |
3. Pictures of Horizontal crawl full hydraulic KL511 magnetic rock mining drill machine
4. Top techonology and gurranty
One year warranty in overseas branch
D&R center ensure top advantages
Core screw rod manufacturing technology
World top-class heat treatment production line imported from Japan
Advanced automatic mloding production line from USA
The UK HOLROYD NC srew rotor sharpnener
Advanced NC machine
German TRUMPF flexible sheet metal processing system
5. package and shipping
Package way: null
Shipping way: by sea
Delievery time ;15-20 days after the payment.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier