Honeywell NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR FLOATING AND TWO-POSITION CONTROL

N05, N10 SERIES
NON-SPRING RETURN DIRECT-COUPLED DAMPER ACTUATORS FOR
FLOATING AND TWO-POSITION CONTROL

SPECIFICATIONS

Supply voltage:230 Vac -15%

Nominal voltage:230 Vac, 50/60 Hz

All values stated hereinafter apply to operation under nominal voltage conditions.

Power consumption:22 VA / 2W, 50 Hz

Ambient limits:

Ambient operating limits   -5...+140 °F (-20...+60 °C)
Ambient storage limits      -22...+176 °F (-30...+80 °C)
Relative humidity              5...95%, non-condensing

Safety:

Protection standard       IP54
Protection class             II as per EN 60730-1
Overvoltage category    II

Lifetime:
Full strokes    60000
Repositions   1.5 million

Mounting: 
Round damper shaft     3/8 in…5/8 in.
Square damper shaft    1/4 in…1/2 in.; 45° steps
Shaft length                  min. 1-5/8 in.

End switches (when included):

Rating        Class II

Triggering points:  5° / 85°

Torque rating:  44 lb-in. (5Nm) / 88 lb-in. (10 Nm)

Runtime for 90°: 65…110 sec (60 / 50 Hz)

Rotation stroke :95° + 3°

Dimensions:  see “Dimensions” on page 6

Weight (without cables) :1 lbs.

Noise rating :35 dB(A) max. at 1 m

GENERAL

This non-spring return direct-coupled damper actuator provides floating and two-position control for:
• air dampers,
• VAV units,
• air handlers,
• ventilation flaps,
• louvers, and
• reliable control for air damper applications with up to 10 sq.ft. / 44 lb-in. (5 Nm) and 20 sq.ft. / 88 lb-in. (10 Nm)
(seal- less damper blades; air friction-dependent).

Wiring Diagrams

DIMENSIONS