Homopolymer Polypropylene PP plastic raw materials for Pipes & Tubes
Virgin&Recycled PP granules
(1)Injection or extrcsion grade ,
(2)Used for bags,plastic toy,container and bottles.
(3)Good quality.
Homopolymer Polypropylene PP plastic raw materials for Pipes & Tubes
Specification:
Properties |
Unit |
Test method |
Value |
Melt Flow Rate |
|
|
|
Melt flow rate(230°C/2.16KG) |
g/10min |
ISO 1133 |
12 |
Mechnical Properties |
|
|
|
Tensile modulus of elasticity(v=1mm/min) |
Mpa |
ISO 527-2 |
1550 |
Tensile yield at stress(v=50mm/min) |
Mpa |
ISO 527-2 |
35 |
Tensile yield at strain (v=50mm/min) |
% |
ISO527-2 |
8 |
Tensile strain at break (v=50mm/min) |
% |
ISO 527-2 |
>50 |
Charpy impact strength unnotched(+23°C) |
KJ/m2 |
ISO 179/1eU |
110 |
Charpy impact strength notched(+23°C) |
KJ/m2 |
ISO 179/1eU |
3.0 |
Izod Impact strength notenched(+23°C) |
KJ/m2 |
ISO 180/1A |
3 |
Ball indentation hardness(H 358/30) |
Mpa |
ISO 2039-1 |
78 |
Thermal Properties |
|
|
|
Melting point,DSC |
°C |
ISO 3146 |
163 |
Heat deflection temperature ------------HDT/B(0.45Mpa) |
°C |
ISO 75-2 |
85 |
Vicat softening temperature ------------VST/A50(10N) |
°C |
ISO 306 |
154 |
Other Properties |
|
|
|
Density |
g/cm3 |
ISO 1183 |
0.91 |
Our Service:
1 . General Purpose Plastic : ABS, PP, PE, PS, AS, PVC.
2 . Engineering plastics : PA, PC, PMMA, POM, PBT, PET, PPO, PPA, PPE, CA, CAP, CAB, K (Q) plastic , etc. ;
3 . Special project : PPS, LCP, PEEK, PEI, PES, PSU, PTFE, PVDF , etc. ;
4 . Thermoplastic elastomers : EVA, TPE, TPEE, TPR, TPU, TPV, TPX and so on.
5. Plastic alloy : PP / EPDM, PC / ABS, PA / ABS, PA6/PA12, PC / PBT, PA \ PTFE, PC \ PTFE, POM \ PTFE etc.
6. It also sells a variety of special materials : There ASA, AES high weathering series ; copolyester PCTG, PETG , such as Bisphenol A (BPA) bottles, space cups Compound ; SBS, SEBS, SIS, EPDM, POE, POP. , EAA , such as toughening material . LED lamp dedicated PC diffusion material , PLA biodegradable plastics and a variety of modified plastics .