Home use non-pressurized solar water heater pool Vacuum Tubes solar water heater
Model1 |
BTE5818-12 |
BTE5818-16 |
BTE5818-20 |
BTE5818-25 |
BTE5818-30 |
Model2 with Floating tank |
BTF5818-12 |
BTF5818-16 |
BTF5818-20 |
BTF5818-25 |
BTF5818-30 |
Absorbing area(m2) |
1.66 |
2.21 |
2.76 |
2.76 |
2.76 |
Tank capacity |
120L |
150L |
200L |
250L |
300L |
Vacuum tube |
58*1800mm/three layer film/5.2x10-4Pa/thickness of glass 1.6mm |
||||
Tube quantity PCS |
12 |
16 |
20 |
25 |
30 |
Inner tank |
Stainless steel SUS304/316L |
||||
Outer tank |
Hot galvanized Plate/Stainless steel |
||||
Insulation |
Polyurethane/Thickness50mm-62.5mm |
||||
Support |
Hot galvanized Plate/Stainless steel/Aluminum |
||||
Tilt angle |
21°/27°/33°/45°/50° |
||||
Electrical heating |
Optional |
||||
Controller |
Optional |
||||
Filling tank |
Optional |
||||
Empty weight Kg |
46 |
54 |
62 |
79 |
98 |
Qty. 20'/40’/40HQ |
48/100/116 |
40/80/88 |
32/68/72 |
28/56/64 |
22/44/52 |
Working principle:
The evacuated tubes have two layers of glass tubes, the inner tube absorb solar radiation then convert into heat energy and transfer it to the water in inner tubes. As we know, the density of water in different temperature is different, so the hot water circulates to the water tank, cold water in tank flowing into tubes, through this natural circulation, the water will be heated.
The solar water heater tank is a non-pressurized tank, and has an opening to the ambient atmosphere. Solar water heater tank should always be filled with water to avoid damage caused by dry high temperature working conditions. The stainless steel our use belong to food grade, and SUS 304 & SUS 316 have better corrosion resistance.
BTE Solar Advantages:
1.The material of inner tank is stainless steel, good function of anticorrosion and long working life;
2.The material of outer tank is hot galvanized sheet steel with plastics-prayed surface, beautiful and durable;
3.The insulation material of manifold is polyurethane, keep energy in long time;
4.High quality evacuated tubes with triple layer selective absorber coating, vacuum degree≤5.2x10-4Pa, absorbing efficiency≥92.5%;
5.Full automatic production line can realize your different requirements;
6.Working life≥20years.
The quick measuring instrument from Germany can do function test on production line which ensure each absorber plate to meet your high quality requirements.
In 2014, BTE successfully developed the new flat panel collector with "Bonding" technology. Its efficiency is 10% higher than normal blue film collector.
On the base of professional technology experience and cooperation with researching institutes and universities, BTE has developed high weather-proof selective absorbing film from full-automatic magnetron sputtering production line. Averaged 45s/p production efficiency can delivery your order in short time.