Include | 1pc one gallon stainless steel keg 1pc Twist-tube beer spear 1pc Brass chromed faucet 1pc Standard CO2 regulator( no CO2 cartridge) 1pc standard gift box |
Packing (carton) | 6 sets/carton size: 43cm*50cm*49.5cm Gross weight: 30kg |
a)Dimple: Dimple make the whole structure more stable; Prevent beer flowing to the table, the dimple will "store" it.
b)Plum cover: Hexagon cap, you have a focus to open the cap easily.
c)Standard 128oz: Very suitable for bar or brewery, don't need worry about that filling more beer.
Unlike many other mini kegs, these mini kegs use the gold standard acid bath electrolosis to pacify the stainless steel making the more resistant to rust than any other mini keg on the market.
1.The capsule:High quality offers consistent charger.
2.The tap:Made of high-grade ABS, polished chrome.
3.The keg:Your Best Take It To Go Solution for tea, water, beer, alcoholic, non-alcoholic beverages.
All our kegs are made from 304 high grade stainless steel, which have been pressure and quality tested. They are virtually unbreakable and have a 5 year warranty.
The packing can be customized. If you need gift package please contact us.
Date | Quantity |
7 days | 48PCS (without logo) |
14days | 64PCS (without logo) |
2-3 week | 100-200PCS (without logo) |
3 week | 100-200PCS (include logo) |
3 week | over 200PCS |
Trouble shooting | Solution |
Leaks gas as soon as the cartridge is installed | 1.Make sure the regulator dial is off turned all the way counter close 2.Tighten the cartridge seal Replace the CO2 cartridge it is damaged |
Make sure the CO2 cartridge is installed, the cap is turned on, and pressure is indicated on the pressure gauge. | |
without stopping when closed | 1.A few drips after closing the tap is normal. But it should not drip over time. 2. If the keg and tapping system is clean, internal O-ring may have worn through use and be in need of replacement. |
1.First pour may be foamy if the beer line is full of air after being filled or the tap assembly has been allowed to warm up. Second beer should pour fine, if that's the case. Keep out of the sun. 2.Beer may be highly carbonated from the bar or brewery. If beer in keg is pressurized at 5 psi but came from brewery beer line pressurized at 25 psi, beer will pour foamy until the pressure equalizes after few days in the keg. Be sure to open the tap handle fully and let go during the pour. Attempting to meter the flow during the pour can lead to foaming. |
