Hoist Plug

Use:

Hoisting Plug is the connecting link between hoisting cable and drill rods.

 Wireline C series Core Barrel

Wireline drilling is the special method of removing the core.
When the driller wants to remove core from a conventional core drill, the entire core barrel has to be removed from the hole. This is time-consuming, as each rod has to be removed one at a time.

With wireline drilling, a barrel of core can be removed from the bottom of the hole without removing the rod string. When the driller wants to remove the core, an overshot is lowered on the end of a wireline. The overshot attaches to the back of the core barrel inner tube and the wireline is pulled back and the inner tube disengages itself from the barrel.

1.5m and 3.0m length core barrels are avaiable.

Wireline series Core Barrel available:
C series Core Barresls: AC, BC, NC, HC, PC, NC3, HC3
WF series Core Barresls: HWF, PWF, SWF, UWF, 412F
We also supply NMLC, HMLC Core Barrel.
Double Tube & Single Tube Core Barrel: NWG, HWG
We will feel happy to give you a quotation upon receipt of your detailed requirements.

Drill Rods size:

TT Series also available .  

TT series double tube core barrels are super-thin walled barrels suitable for coring in medium and hard homogenous formations using water flush. Typically they are used for underground coring applications in mines. 

The TT series core barrels are available in two metric sizes 46 and 56 mm hole diameter. 

Because the bits have a very thin cutting face, TT series barrels require relatively light feed pressure and torque. They cut effectively at high rotation speeds using lightweight diamond drills.

The core can be quickly removed from the core barrel as the inner tube can be instantly disconnected from the Head Assembly, via a snap-on coupling, with no need to unscrew the outer tube first.

The Inner Tube and Outer Tube are manufactured from cold drawn steel tube with a very high tensile strength and straightness. The Head Assembly is manufactured from heat-treated alloy steel to ensure long life.

As an option TT series core barrels can be used with clear plastic Coreliner tubes to form an inner, triple tube.This greatly facilitates core handling and improves presentation. When Coreliner tubes are used an undersized bit and corelifter are required.