Highly efficient drills with long service life. Manufactured by Mitsubishi Materials & Kyocera. Made in Japan (deep hole drills)
Highly efficient drills with long service life. Manufactured by Mitsubishi Materials & Kyocera. Made in Japan (deep hole drills)
1. MITSUBISHI HSS milling shank drills SE High Precision Drill Series
New HSS drill with newly developed proprietary D-STH surface treatment.
Excellent for a wide range of work materials, wear resistant, lubricity and sharp cutting edge.
|SEPDS/SEPDM
|What is D-STH treatment?
Geometry of sharp cutting edge
Proprietary D-STH surface treatment maintains sharp cutting edge even after drilling because D-STH treatment is a surface treatment that hardens the surface of tool substrate unlike a coating.
Excellent welding resistance and smooth chip disposal due to better condition of tool surface
Minute holes on a tool surface helps coolant penetrate into the holes, which result in the superior lubricity. The lubricity provides excellent welding resistance and chip disposal.
(The difference of welding resistance can be seen significantly when machining aluminium alloy)
Meanwhile the coated product has small grains (macro particles) on the tool surface, and it leads to the problem of welding.
2. MITSUBISHI New Generation Solid Carbide Drills WSTAR Drill Series
New generation solid carbide drills
With new TRI-cooling Technology®
PVD coating provides long tool life for a wide range of applications.
|MVE/MVS
Cutting Performance
3. KYOCERA Magic Drill DRX Type
4. KYOCERA Magic Drill DRC Type
5. Please, let us know if you need more information about the following drills of our Mitsubishi Materials catalog
| Series | Details | Series | Details | Series | Details | Series | Details |
| 3KD | 3 shank types for portable power tools (Triangular shank) | BRA | Low thrust due to absence of a chisel edge.Easy regrinding (NEW POINT DRILL) | BRB | Excellent cutting sharpness and chip discharge due to high rake type insert. {New point drill for bridge construction parts (l/d=3)} | BRL | Low thrust due to absence of a chisel edge. Easy regrinding (NEW POINT DRILL) |
BRM | Excellent cutting sharpness and chip discharge due to high rake type insert. High efficiency, high accuracy machining. Suitable for stainless steel, mild steel and general steel drilling. (l/d=5) | BRMB | Excellent cutting sharpness and chip discharge due to high rake type insert. {Key point drill for bridge construction (l/d=5)} | BRS | Excellent cutting sharpness and chip discharge due to high rake type insert. High efficiency, high accuracy machining. Suitable for stainless steel, mild steel and general steel drilling. (l/d=3) | DCBSS | For machining materials such as sintered ceramics and quartz glass that cannot be machined with conventional drills. (Drill for hard brittle materials) |
| BRSB | Excellent cutting sharpness and chip discharge due to high rake type insert. {Key point drill for bridge construction (l/d=3)} | ||||||
| DCSSM | Due to the Diamond Coating original technology of our company, it excels in film adhesion. There is neither flaking off or cutting edge chipping. Consistent cutting is possible. (Medium, For non-ferrous material) | DCSSS | Due to the Diamond Coating original technology of our company, it excels in film adhesion. There is neither flaking off or cutting edge chipping. Consistent cutting is possible. (Short, For non-ferrous material) | EPSS | Special cutting edge geometry to prevent through hole burrs. (Plate pal) | GSD | Original manufacturing and coating technology for improved performance. (TiN, Straight shank) |
| GTD | Original manufacturing and coating technology for improved performance. (TiN) | GTTD | Special point geometry for minimal through hole burrs. (TiN, For steel frame) | GWSL | Suitable for extra deep hole drilling. (TiN, Extra long) | GWSS | Suitable for general and deep hole drilling. (TiN, For deep hole, Convolute flute) |
| GWTS | Suitable for general and deep hole drilling. (TiN, For deep hole, Convolute flute) | KSD | Sharp edge geometry for stainless steels up to 200HB. (Cobalt HSS, For stainless steel) | KTD | Suitable for difficult-to-cut materials. (Cobalt HSS) | LSD | Widely used for deep hole drilling. (Extra long) |
| LTD | Widely used for deep hole drilling. (Extra long) | MCS | For high accuracy and efficient drilling of CFRP. Unique diamond coating produces excellent wear resistance and a smooth hole surface. (For CFRP) | MGS | MGS drills are suitable for use with shrink fit holders. (SOLID GUN DRILL) | MHS | High backling strength and unique double margin. (WSTAR) |
| MMS | New grade DP7020 and a unique margin, developed specifically for stainless steel, complement high flow coolant holes. For high accuracy and efficient drilling of stainless steels. (WSTAR) | MNS | Four coolant holes is ideal for MQL applications. (WSTAR) | MQS | Long tool life and high efficiency drilling for steel and cast iron. (WSTAR) | MSP | SPOT DRILL |
| MVX | Ideal combination of outer CVD insert and inner PVD insert. High rigidity body that enabled L/D=6 deep hole machining. | MWE | Suitable for low to high speed cutting. For high accuracy and efficient drilling of steels, carbon steels and difficult-to-cut materials. (WSTAR) | MZE_MZS_STEP | Helical through coolant hole enables high speed machining (MZS type). (STEP DRILLS) | SD | For general drilling. (Straight shank) |
| SD1_100 | The diameter tolerance is - 0.007-0mm. (Straight shank, 1/100mm) | ||||||
| SDLS | It is recommended to use when long overall length is demanded for preventing collision with workpiece with high rigidity. For both machining center and manually operated machines. (STRAIGHT LONG SHANK DRILL) | SEPDM | Proprietary D-STH surface treatment provides sharp cutting edge, excellent welding resistance and smooth chip discharge. (SE High Precision Drill Series) | STAW | Wavy cutting edge design for good chip control. Highly rigid clamping system offers stability and reliability for small hole drilling. (Small Diameter Indexable Drill) | TAFS_TAFM_TAFL | High rigidity holder. Economical due to the use of 4 cutting edges. Various grades and chip breakers. |
| TAW | Wavy cutting edge design for good chip control. Serration geometry for accurate insert location. (Indexable Drill) | TD | For general drilling. (Taper shank) | TTD | Special point geometry for minimal through hole burrs. (For steel frame) | VAPDM | Highly efficient drilling and long tool life have been achieved with the newly developed Violet coating. (Standard drill depth : less than 5 times the drill diameter) (Medium, High precision) |
| VAPDMSUS | Our new design and the violet coating enable high efficiency drilling and long tool life for processing stainless steels. (Medium, High precision, For stainless steel) | VAPDS | Highly efficient drilling and long tool life have been achieved with the newly developed Violet coating. (Standard drill depth : less than 3 times the drill diameter)(Short, High precision) | VAPDSCB | Unique geometry offers high efficiency counter boring. Excellent chip breaking and flat counterbored surface.(Short flute length, High precision, For counter boring) | VAPDSSUS | Our new design and the violet coating enable high efficiency drilling and long tool life for processing stainless steels. (Short, High precision, For stainless steel) |
| VCHSM | A suitable geometry for high hardness (60 HRC) material drilling. | VCSSS_3MM | First recommendation for pilot hole drilling of hardened material. {Short, For steel (3mm shank series)} | VSD | Straight shank | VTDS | Short, Taper shank |
| MAE_MAS | Pre-hole drilling for rolled tap. Helical through coolant hole enables high speed machining (MAS type). Specialized in aluminium and cast iron drilling. High hole accuracy. | MINI-MVS | Straight cutting edge that combines the chips evacuation and cutting edge strength improvement. Double margin achieves the optimum balance and precision in small diameter drill. MVS-X02- =Drill for guide hole Dimensions = 0+0.014, Hole depth=2DC (WSTAR) | MSE | Wide flute for preventing chip jamming. Stable, small diameter machining. | MVE | New grade DP1020 offers long tool life for a wide range of work materials. The unique wavy cutting edge provides excellent sharpness and rigidity and helps to control wear at the periphery. (WSTAR) |
| MVS | New grade DP1020 offers long tool life for a wide range of work materials. Unique coolant supply technology, TRI-cooling offers high machining efficiency. (on drills over ø6) (WSTAR) | MWS | For high accuracy and efficient drilling of steels, carbon steels and difficult-to-cut materials. | MZE_MZS | Excellent chip disposal. Helical through coolant hole enables high speed machining (MZS type). |
|
New Buyer Q&A
<Question(1)> : What is TOKIWA CO.,LTD?
<Answer> : We are a Japanese Trading Company, with great experience in the industrial equipment business. We have developed a professional skilled service to our customers for more than 90 years.
<Question(2)> : What can TOKIWA provide?
<Answer> : We mainly deal with Rubber Hose, PVC Hose, V-Belt, Timing Belt, Roller Chain, PVC Tarpaulin, Bearing, Tape, Hand Tools, Packing, Rubber Sheet, Film, etc.
<Question(3)> : How is your service quality?
<Answer> : We provide a 24 hours quick reply. Fast delivery service after payment confirmation.
<Question(4)> : Can you provide samples?
<Answer> : Yes, product sample inquiries are warmly welcomed. You only need to pay for the shipping.
<Question(5)> : How can I send request for quotation?
<Answer> : Kindly inform us with Product #No. or Code. & Quantities for each product.
<Question(6)> : What is your MOQ (Minimum Order Quantity)?
<Answer> : We do not have MOQ for our products, you can order even just 1 piece.
<Question(7)> : How can I pay?
<Answer> : We accept L/C, T/T, PayPal.
<Question(8)> : How about your Inspection & Packaging?
<Answer> : We will do inspection before packaging. Standard Export Packaging.
<Question(9)> : How about your shipment?
<Answer> : We can delivery both by air and sea. We use a wide range of companies and services such as EMS, FedEx, UPS, DHL, TNT, Less than Container Load, 20ft & 40ft Container.
<Question(10)> : I want to buy one of your products, but I don't speak Japanese. Can you speak English?
<Answer> : Yes, of course. In Tokiwa, our experienced multilingual trading team can attend your request and communicate not only in Japanese, but in English, Chinese, French and Spanish.
Please send an inquiry about the products you are interested in. We will give you more details of the products. We will do our best to satisfy your demand. We are loking forward to hearing from you.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier