Highly Effective Absolute 99.99% PES ( Polyethersulfone ) Membrane 0.22 Micron Filter For Beer / Brewery Filtration
These PES membrane filters are constructed of absolute rated, hydrophilic polyethersulfone (PES) membrane and polypropylene components.
Polyethersulfone is low protein binding and excellent resistant to hydrolysis, therefore a good choice for terminal filtration of water treatment, food&beverage, pharmaceutical applications, etc.
1. Absolute rate inherently hydrophilic PES membrane filter for sterilizing grade filtration;
2. Highly asymmetric PES membrane provides high dirt holding capacity and longer service life;
3. Higher throughput and flow-rate than any other sterilizing grade filter cartridge;
4. Low protein binding, suit for a broad range of pharmaceutical products;
5. Excellent resistance to hydrolysis allows use in Ultra Pure Water(UPW) system;
Materials Of Construction | Filter Media: | Asymmetric PES Membrane | ||||
Support Layers: | Polypropylene | |||||
Micron Rating: | 0.04, 0.1, 0.2, 0.45, 0.65, 0.85, 1.2 um | |||||
Inner Core: | Reinforced Polypropylene | |||||
Outer Cage, End caps: | Reinforced Polypropylene | |||||
Seal Method: | Thermal Bonded, No Adhesives | |||||
O-rings/gaskets: | Silicone, Nitrile, EPDM, Viton, , etc | |||||
Cartridge Dimensions | Outer Diameter | 69mm(2.75'') | ||||
Inner Diameter | 33mm(1.30'') | |||||
Length(based on DOE end caps) | 10"- 254mm, 20"- 508mm, 30"-762 mm, 40"- 1016mm | |||||
Filtration Area(m2) | 0.65 m2 per 10'' | |||||
Operating conditions | Normal Operating Temperature: | Up to 60℃ (140℉) | ||||
Max.Operating Temperature: | 85℃ (185℉) at P≤1.0 bar (14.5psi) | |||||
Max. Differential Pressure | ||||||
Normal Flow Direction: | 4.2 bar (60.9 psi) at 25℃ (77℉) | |||||
Reverse Flow Direction: | 2.1 bar (30.5 psi) at 25℃ (77℉). | |||||
PH Value compatibility: | 2-13 | |||||
Sterilization: | Steam Sterilization for 30 minutes at 121±2 ℃, Cumulative Time:8 hours; | |||||
Typical water flow rate @ 25 ℃ (10") | ||||||
Cartridge Safety | Endotoxin: | <0.25 EU/ml | ||||
Extractables: | 0.03g / 10" |
ORDER INFORMATION
GRADE | PRODUCT | MICRON | ADAPTER | LENGTH | O-RING / GASKET | |
H - Chemical | IPS | 004-0.04um | AA- DOE | 10-10" | S-silicone; N-nitrile | |
E - ELECTRONIC | 010-0.1um | CN-226/FIN | 20-20" | E-epdm ; T- (encaptulated) | ||
P - Phamar | 020-0.2um | BN-222/FIN | 30-30" | V-viton | ||
F - Food | 045-0.45um | BF-222/ FLAT SEAL | 40-40" | How to Order?- Example | ||
065-0.65um | CF-226/FLAT SEAL | 05-5" | Pharmaceutical grade; Micron:0.45um; Length:10" ADAPTER: DOE; Gakset: Silicone. Selection Code is: PIPS045AA10S | |||
EN-222 three locking ears /Fin | Other-XX |
Factory information
Certificates: