High-viscosity two-component glue / silicone / white latex dispensing system Two-component silicone, sealant dispensing machine
There is a discount for consulting customer service before placing an order.
| Overview |
| The piston type pressure bucket is mainly suitable for glues with high consistency and poor fluidity, such as silicone, black rubber, epoxy resin, etc., to perform glue dispensing to the syringe for poor fluidity and highly viscous liquids, which solves the problem of no pressure or uneven pressure. , Laborious, time-consuming problems. The internal pressing part adopts imported piston. The piston is configured in a three-layer structure. The working principle of the piston is pushed by the cylinder to squeeze out and dispense the glue. The piston and the barrel are tightly matched, no glue leaks, no glue, and the glue is uniform and clean. , Reducing waste of fluid. |
| Scope of application |
| AB two-liquid dispenser is suitable for all kinds of AB glue, two-component or multi-component liquid, including AB glue, two-component glue, AB epoxy potting. Of course, for the ordinary pneumatic AB two-liquid dispenser, the consistency of A glue and B glue can not be too different, generally not more than 1:5, otherwise the glue is more difficult to mix evenly. |
|
Packing list :1*glue dispenser 1*glue value 2*1L stainless steel press tank 1*Standing stand |
| Product Name: Isolated two-liquid dispensing valve | Model: BY-32AB |
| Cylinder: double acting cylinder | Operating viscosity: 1-1.000.000cps |
| Feeding pressure: <10kg | Operating rate: 600/min |
| Size: 33*147mm | Weight: 500g |
| Form: suckback type (isolated) | Body material: stainless steel |
| Minimum discharge: 0.01ml | Feed port size: 1/8"npt(f) |
| Use air source: 0.1-7kgf/cm | Outlet diameter: 3mm (can be connected to any needle) |
1. Power key: press the light on to open, the light off to off
2. Dispatch time display: Displays the set time
3. Input pressure regulator: first pull out, reverse the pressure is small, smooth to large pressure
4. Barometer: display range of 0-100pSi
5. Continuous vent: Connect the dispensing valve to the continuous inlet
6. Test key: In the debugging, can replace the foot switch to use
7. Interval time setting dialing key: Display setting time, adopt the addition and
subtraction mode 0.1-9.9S (automatic timer)
8. Spit time dial key: display set time, using addition and subtraction 00.01-99.99S
(automatic timing)
9. Control the air outlet: Connect the dispensing valve to control the air hole
10. Pedal switch: Control spitting glue
11. Air compressor connection interface
12. Dispatch mode programmer: 16 kinds of free set spit way
13. Pedal Controller Interface: Connect the foot switch
14. Power input socket
Need different volume pressure barrel, please contact customer service.
 |
 |
 |
 |
 |
 |
1. OEM Manufacturing is welcome.
2. Sample order is accepted.
3. We will reply you for your inquiry within 24 hours.
4. After shipping, we will track the products for you once every two days, until you get the products.
5. When you got the goods, test them, and give me a feedback.If you have any questions about the problem, contact with us, we will offer the solution for you.
6. The warranty of our products is 1 year.
Q1. What is your packaging terms?
Usually, we package our products in color boxes and brown cartons. Provide a reasonable minimum order quantity of OEM services. If you have a legally registered patent, we can package the item into your brand box after receiving your authorization. The cost depends on the quantity.
Q2. What is your payment terms?
Western Union, T/T and Paypal are 100% advanced before sending the product. If you need additional terms, please discuss with our sales staff.
Q3. What is your shipping terms?
EXW. If you need additional terms, please discuss with our sales staff.
Q4. How is your delivery time?
In general, the number of 100 sets or less is only 2-10 working days. The exact delivery time depends on the model of the material, the stock of the material and the quantity of the order.
Q5. What is your sample policy?
We do not have a minimum order quantity for sample orders. And the sample order can enjoy the fastest lead time only one day after receiving the payment.
Q6. Do you test all the goods before delivery?
Yes, we performed 100% testing before delivery and all products were tested for at least 48 hours to ensure good quality.
Q7. How do you make our business a long-term and good relationship?
1. We maintain good quality and competitive prices to ensure customer benefits;
2. We respect each customer as our friend, we do business in good faith, make friends with them,
No matter where they come from.
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier