Welcome to TradeChina
High strength non shrink grout mortar for construction NSG-350
FOB Reference Price
Purchase quantity ()
Minimum order quantity
Payment
Meo Food Co., Ltd.
China - Hangzhou
Trading Company
Trade Capacity
Export Percentage
0-30%
Nearest Port
Penang, Valparaiso,Jetta
Accepted Delivery Terms
Employees
501-1000 people
Accepted Payment Currency
USD,EUR
Average Lead Time
5 Day(s)
Certifications
Product Specifications
--Product Description
Product Description
Product Description
NSG-350 is made of cement,silica sand and other additives to create an interior or exterior grout with non-shrinking characteristics. It be used for grouting steel columns, bearing plates, precast concrete, and anchors. Grout compensates for an uneven foundation, distributes weight of unit, and prevents shifting after setting and leveling unit.Uses
NSG-350 is suitable for repairs to the following concrete structures: Machine foundations、Columns in precast construction、Concrete
anchors、Bridge bearings、Cavities、Gaps、Recesses、Rail beds、Honeycombs (pre-packed grouting) etc.
NSG-350 is suitable for repairs to the following concrete structures: Machine foundations、Columns in precast construction、Concrete
anchors、Bridge bearings、Cavities、Gaps、Recesses、Rail beds、Honeycombs (pre-packed grouting) etc.
Advantages
▪ Easy application
▪ High strength
▪ Wear resistance
▪ Good flow characteristics
▪ Dense and non-shrink
▪ Easy application
▪ High strength
▪ Wear resistance
▪ Good flow characteristics
▪ Dense and non-shrink
Technical Information
Test Items | Test Required Value |
Compressive Strength (1 days) | >200 kgf/ cm² |
Compressive Strength (7 days) | >400 kgf/ cm² |
Compressive Strength (28 days) | >550 kgf/ cm² |
Expansion | < 4% |
Consumption
1800 kg/m³
Note: This figure is theoretical and does not include for any additional material required due to surface porosity, surface profile, variations in level and wastage etc.
1800 kg/m³
Note: This figure is theoretical and does not include for any additional material required due to surface porosity, surface profile, variations in level and wastage etc.
Application instructions
Mixing
▪ Pour 4~4.5 kg of water into a suitably sized and clean mixing container, ensuring strict control of the water content (do not over-water).
▪ Add NSG-350 to the water, while slowly mixing, adding the complete contents of the bag.
▪ Mix with a high-speed drill (> 650 rpm) and an egg beater style mixing paddle to blend water and powder for approximately 2~3 minutes, until a lump-free and uniform mix has been produced.
Note: Operating time: 15 ~ 20 minutes (temperature: + 15 ° C(+59°F) ~ + 35 ° C(+95°F))
Application
▪ After mixing, stir lightly with a spatula for a few seconds to release any entrapped air.
▪ The grout is then poured immediately into the prepared formwork. When carrying out baseplate grouting, ensure sufficient pressure head is maintained for uninterrupted mortar flow. For formwork repair, the prepared formwork must be firmly in place and kept watertight.
▪ When placing grout over a large area, it is important to maintain a continuous flow throughout. Work sequence must be properly organised to ensure an uninterrupted flow.
▪ In large areas, NSG-350 may be pumped using heavy duty diaphragm pumps. Screw feed and piston pumps may also be used.
▪ Pour 4~4.5 kg of water into a suitably sized and clean mixing container, ensuring strict control of the water content (do not over-water).
▪ Add NSG-350 to the water, while slowly mixing, adding the complete contents of the bag.
▪ Mix with a high-speed drill (> 650 rpm) and an egg beater style mixing paddle to blend water and powder for approximately 2~3 minutes, until a lump-free and uniform mix has been produced.
Note: Operating time: 15 ~ 20 minutes (temperature: + 15 ° C(+59°F) ~ + 35 ° C(+95°F))
Application
▪ After mixing, stir lightly with a spatula for a few seconds to release any entrapped air.
▪ The grout is then poured immediately into the prepared formwork. When carrying out baseplate grouting, ensure sufficient pressure head is maintained for uninterrupted mortar flow. For formwork repair, the prepared formwork must be firmly in place and kept watertight.
▪ When placing grout over a large area, it is important to maintain a continuous flow throughout. Work sequence must be properly organised to ensure an uninterrupted flow.
▪ In large areas, NSG-350 may be pumped using heavy duty diaphragm pumps. Screw feed and piston pumps may also be used.
6 months from date of production if stored properly in original, unopened and undamaged sealed packaging.
Storage Conditions
Store dry at +5°C(+41°F)~+35 °C(+95°F) Protect from moisture, direct sunlight, flame sources and freezing.
Technical data sheet(TDS)
Company Profile
Our Advantages
◆Professional
Specializing in chemical materials for 24 years.
◆Quality
With stable and high product quality.
◆Service
Professional team to provide service.
◆Performance Cases
Rich experience and a lot of actual performance cases.
◆R&D
Strong R&D team, constantly developing new products.
Exhibition
Packing & Delivery
FAQ
No desirable products?
Sourcing assistant>
How to start your business
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier