High speed fully automatic disposable paper cup making machine price
WORKING PROCEDURE EXPLANATION
To produce the cups, a special cardboard paper with one-side or double side PE lamination is used. Pre-cut paper is feeding automatically to a cone mould, and then the two edges are welded by ultrasonic without any glue. And at the same time, the bottom paper roll is die cut and fed to the cup, then, the cup bottom is preheated and folded with the bottom paper, and goes to the next station, heating and then knurling, then next station is cup top curling and at last the paper cup is finished and delivered.
DESCRIPTION
DP-A12 paper cup machine is an automatic machine with multi-working station,which runs a procedure of single pe coated paper cup fan feeding,cup side welding(by heater),silicone oil lubrication(for cup curling),bottom punching,bottom preheating,bottom folding,bottom knurling,top curling and cup discharging.It has the function of photocell detection,failure alarm,with the advantage of humanism design,safe operation,easy maintenance and durable running.It is an ideal equipment of making disposable paper cups for all types cups (hot and cold drink,coffee,tea,ice cream cup an so on.
Name | Paper Cup Forming Machine | |||
Model | DP-A12 | DP-S12 | DP-S16 | DP-S22 |
Cup Size | 2~12 oz | 2~12 oz | 12~22 oz | 22~32 oz |
(height under 125mm) | (height under 125mm) | (height 90~160mm) | (height 120~195mm) | |
Suitable Paper | 1side | 1side or 2side | 1side or 2side | 1side or 2side |
PE coated paper | PE coated paper | PE coated paper | PE coated paper | |
Paper Weight | 135~280gsm | 135~320gsm | 170~380gsm | 170~380gsm |
Speed | 40~50cup/minute | 40~50cup/minute | 30~40cup/minute | 30~40cup/minute |
Total Power | 5KW | 7KW | 7KW | 7KW |
Working Power | 4KW | 5KW | 5KW | 5KW |
Power Source | 220V/380V 50Hz, (Better use 380V 3-phase) | |||
if your power is different, Please declare in advance. | ||||
Working Air Source | No need | Air-pressure: 0.4MPa; Air out-put: 1m3/minute; | ||
(need to buy Air compressor, 7.5KW Compressor Cost about USD1500) | ||||
Cup side welding | By heater | By Ultrasonic Wave | ||
Cup bottom heating | By heater | By hot air (air compressor provide air) | ||
Bottom welding | Heater knurling | 1side PE paper by heater-knurling; | ||
2side PE paper by cool device (recycle water) knurling | ||||
Machine Pack Size | 2.7 x 1.24 x 1.7m | 2.7 x 1.24 x 1.7m | 3.03 x 1.3 x 1.9m | 3.28 x 1.37 x 2.1m |
Electric Box Size | 0.75 x 0.57 x 1.05m | 0.75 x 0.57 x 1.05m | 0.75 x 0.57 x 1.05m | 0.75 x 0.57 x 1.05m |
Weight (NW) | 1350KG | 1350KG | 1600KG | 1700KG |
Weight (GW) | 1500KG | 1500KG | 1800KG | 1900KG |
Delivery Time | 20~30days | 20~30days | 30~35days | 30~35days |
Payment Item | 30% T/T IN ADVANCE, THE BALANCE T/T BEFORE DELIVERY |
1. Paper cup bottom sealing by hot air station.
2. It is easy to make cups of different size by changing moulds.
3. Cup side sealing by ultrasonic system.
4. Double PE coating paper cups for cold drink as well as hot drink.
5. Equiped with robotic arm and 3 pillar shafts each side, which let the machine run more steady.
6. With our unique original designed single shaft bottom knurling system, this ensures the low leaking ratio and high quality of paper cups.
7. Sucker import from Taiwan, which can reach 100 million times’ life span.
8. Design with special cover, our machine is very good for heat dissipation and ensure the longer life span.
9. all the machine covers could be taken down in 2 minutes, very convenient for repair and daily maintenance.
10. We have 8 cams in the paper cup machines, while others maybe only 6 cams.
11. With automatic failure alarm sysem, when no bottom, or finished cup is over running, the machine will stop automatically.
12.Paper cup body use modified silent clamp system, more accurate and stable.
01.Spread fan wall paper feed entrance 02.Cup cone-body side sealing
03.Transfer the cone-body to turn table 04 , Silicone oil Lubricating, (for cup top rim curling )
05,Insert bottom round piece to cup-cone-body(back view)
Paper fan feeding system, two times feeding, two chain:
06,Finished cups collection. 07, Discharging the cups. Discharge the cups from the forming turn table.
08, Roll bottom paper feeding.
Four nurling heater equipment all of use raw material aluminium with five rounds and one curling heater of aluminium equipment.
09,Bottom roll paper automatic punching
10,Transfer the cone-cup with bottom to the final process (knurling the bottom and curling the top ).
The paper top Curling system:
11,8 pieces main cup molds
Finished Sample
Package
F A Q
1. Q: How does your factory do regarding quality control?
A: Quality is priority. We always regard great importance to quality controlling from the very small thing from the beginning.
2. Q: What is your after-sales service?
A: Our after-sales service is first class. We have a powerful team to help you solve problems.The Warranty is one year and if the machine is damaged by natural not by human, we can send the new parts to you for free.
3. Q: What is the terms of payment you accept?
A: 30% T/T in advance, 70% T/T balance before delivery. We also accept L/C and Western Union.