358 security fence, also called anti climb fence, is the ultimate heavy duty welded mesh panel providing the highest degree of security with excellent see through visibility. 358 security fence has toe and finger proof profile. With spacing specification of 75mm x 12.5mm, it is impossible for fingers and toes to go through. Our 358 security fence is perfect as a guarded fence system because of its exclusive thickness, anti-cutting materials and its framework is very strong resistant. With our excellent anti-climb fence supply, clients can enjoy the greatest relaxation and secured protection from inside of your own.
Click here for more information>>>>>
Features:
•Coated with galfan and Polyester, making the surface smooth and flawless, and effectively protect the wire from rust and corrosion.
•High quality low carbon steel wire and full weld make the panels robust, anti-cut, anti-stretch.
•Safe, anti-climb, the hole opening is smaller than finger diameter, provide maximum visibility.
Specification
358 mesh panel
|
|
Height
|
1.8m-3m
|
Width
|
2m, 2.2m, 2.5m, 3m
|
Mesh Opening:
|
3" X 0.5" X 8 Gauge Wire(12.7mm X 76.20mm Wire)
|
Feature:
|
Anti Cut ,Anti Climb
|
Curves
|
On request
|
Material
|
Low carbon steel wire, galvanized wire
|
Surface treatment
|
Galvanized + powder coated
|
Post
|
|
Length
|
On request(Normal 2.3m-4m)
|
Square post
|
60x60mmx3mm, 80x80mmx3mm
|
Round post
|
80mmx3mm
|
C post
|
62x83mmx3mm
|
Cover steel plate
|
On request
|
Single Arm or Double Arm
|
On request
|
Tension Wire or Barbed Wire
|
On request
|
Detailed Images
>>Weld strength is 75% of the minimum tensile strength of the wire (tensile range 540-690 N/m²).
>>this system combines an anti climb and anti cut fence with excellent through visibility and resistance to vandalism.
>>Extra length panels can be supplied for burying 300mm below ground to prevent burrowing.
>>An adhesion coating is applied to allow perfect adhesion with the polyester coating (min. 100 micron).
>>Posts are polyester coated with a galvanized substrate in accordance with Euro norm 10147.
Mesh Panel Production Line: Using high quality Iow carbon steel wire as raw material, the welded panel, after galvanization, powders primer, and powders top coating; can effectively resist the corrosion and ultraviolet radiation
Fence Post Production Line: material---cut short machine---sandblasting machine---galvanized bath---Parkerizing tank---power coated machine
Production Capacity: About 7000 sets per month
Panel packing:
<1>Plastic film at the bottom to avoid the panel be destroyed
<2>4 metal corners to ensure the panel strong and uniform
<3>wood plate at the top of pallet to keep the under panel
<4>pallet tube size:40*80mm tubes at the botom vertical position
Fence post packing:
<1>plastic cap cover onto the post
<2>plastic film +metal pallet for fence pot
Accessories packing:
<1>stainless steel nuts and screws install with clips
<2>5 sets clips load into one plastic bag
<3>12 bags into one carton box
Sample time |
5-7 days |
Production time | 15-30 days after receiving deposit. |
Payment clause | FOB, CIF, CFR, etc. |
Payment currency | USD, etc. |
Payment methods | T/T ( 30% deposit ), L/C at sight, Western Union, Money Gram, Paypal, etc. |