High quality stainless steel 304 non-display rod type magnetostrictive level gauge

High quality stainless steel 304 non-display rod type magnetostrictive level gauge 

The structure of the magnetostrictive liquid level sensor is composed of stainless steel tube (measurement rod), magnetostrictive wire (waveguide wire), movable float (with permanent magnet inside) and other parts.

When the sensor is working, the circuit part will excite a pulse current on the waveguide wire, and when the current propagates along the waveguide wire, a pulse electromagnetic field will be generated around the waveguide wire. There is a float outside the sensor rod, which can move up and down along the rod with the change of liquid level. There is a set of permanent magnetic rings inside the float. When the pulse current magnetic field meets the magnetic ring magnetic field generated by the float, the magnetic field around the float changes so that the waveguide wire made of magnetostrictive material generates a torsional wave pulse at the position of the float. This pulse moves along at a fixed speed.

The APX901 high-precision magnetostrictive level gauge produced by Jining Epson Automation Instrumentation Co., Ltd. measures the level of oil tanks. Its advantages are:
1. Strong reliability: Since the magnetostrictive level gauge adopts the waveguide principle, there is no mechanical movable part, so there is no friction and no wear. The whole transducer is enclosed in a stainless steel tube and has no contact with the measuring medium. The sensor works reliably and has a long life.
2. High accuracy: Since the magnetostrictive level gauge works with waveguide pulses, the measured displacement is determined by measuring the time of the initial pulse and the end of the pulse during work, so the measurement accuracy is high, and the resolution is better than 0.01% FS. It is an accuracy that is difficult to achieve with other sensors.
3. Good safety: The magnetostrictive level gauge has high explosion-proof performance, intrinsically safe explosion-proof, safe to use, and is especially suitable for the measurement of chemical raw materials and flammable liquids. There is no need to open the tank lid during measurement, to avoid the insecurity of manual measurement.
4. Magnetostrictive level gauge is easy to install and simple to maintain: Magnetostrictive level gauges are generally installed through the existing nozzles on the top of the tank, and are especially suitable for the installation of underground storage tanks and tanks that have already been put into operation. The process does not affect normal production.
5. Facilitate system automation: the secondary instrument of the magnetostrictive level gauge adopts standard output signals, which is convenient for the microcomputer to process the signals, and it is easy to realize networking work and improve the automation degree of the entire measurement system.