Light Sources | CW or WW (200w or 300w) COB LED |
Manual zoom range | 12° to 30° or 25° to 50° |
Power Consumption | 200w or 300w |
Warranty | 2years |
Control Modes | RDM,DMX,auto run,Master,Slave |
Touch screen | LCD with touch screen |
DMX Channel | 1/2 Channel |
12°-30° Dimension | 86x18x44 cm |
25°-50° Dimension | 74x18x44 cm |
NW | 10.5kgs |
There are 6 normal steps for QC control process: | ||||||||
Step 1: all materials passed 100% IQC inspect | ||||||||
Before send materials to workshop and start to produce, our IQC technicians will inspect them.And only the materials are approved to send to workshop if they are qualified. | ||||||||
Step 2: at least 48 hours aging test before packing | ||||||||
All unit lights will be 100% QC inspect and takes around 48- 72 hours aging test | ||||||||
Step 3: hang testing | ||||||||
Each batch production we will select certain percent to do hang or rotating test. | ||||||||
Step 4 : Environment high temperature testing | ||||||||
we did two parts test for high temperature testing : | ||||||||
A: testing during the product still in R & D | ||||||||
B: testing for each batch production | ||||||||
Usually we test the temperature reach to around 45℃. | ||||||||
Step 5 : vibration test--simulating transit environment | ||||||||
each batch production we will select certain percent to test to make sure the goods is safe in transport. | ||||||||
Step 6: waterproof testing (only for IP65 lights) | ||||||||
all waterproof lights we will do waterproof test to see can it be work fine under rain. |