Polypropylene T30S
Quality |
Value |
Test Method |
1, MFR (2.16kg/230°C) g/10min |
2.9-3.5 |
ASTM D 1238/L |
2, Flexural Modulus,Mpa,Min |
1400 |
ASTM D790 |
3, Tensile Strength @ Yield,Mpa Min |
34 |
ASTM D638 |
4, Elongation @ Yield,% Min |
10 |
ASTM D638 |
Quality |
Value |
1, Density,kg/m3 |
900 |
2, Packed Density of pellets, kg/m3 |
480-520 |
3, Mass fraction of Ash, % |
0.025-0.050 |
4, Thermal-oxidative Aging Resistance at 150°C, h |
360 |
5, Vicat Softening Point, °C |
360 |
6, Rockwell Hardness, R |
82-95 |
Grade:
1. Blow molding grade,
2. Injection molding grade,
3. Film grade;
4. Extrusion grade and Pipe grade.
- Samples: free samples, buyer in charge of shipping cost.
- Payment: T/T,Western Union,MoneyGram, L/C,D/A,D/P