High quality high expansion foam generator high expansion foam system unit for fire fighting
High Expansion Foam Generator
The system includes foam tank, proportioner and high expansion foam generator. This device needs a water supply equipment to provide water with pressure from 0.3~1.0Mpa. A part of water flows into water turbine to drive it rotates and then drive the wind rotor. Another part of water flows into proportioner and its velocity increased rapidly at jet, which result in vacuum in the vacuum chamber. Then the foam concentrate was inhaled to proportioner and mixed with water out from jet and flow into pipe. The solution will be mixed with another part of water from water turbine and was dispersed into droplets when it flows through a nozzle and sprayed to foam generate net. These droplets then form thin films and were blown into amount of foams by wind rotor.
Structure Feature:
1. It has its own proportioner which is connected with foam tank by a straw.
2. It will operate as long as there is pressurized water supply.
3. Fits the small areas total flooding extinguishing system.
4. There are mobile and fixed type to be chosen from.
Technical parameters:
| Model | Inlet Pressure (MPa) |
Foam Volume (m3/min) |
Solution Folo (L/S) |
Expaion Ratio |
| PFG 4 | 0.3~1.0 | 112~200 | 2.4~4.75 | >30 |
| PFY 4 |
- Step 1Find your interested products by search keywords
- Step 2Contact the supplier by clicking ”Enquire” or “request meeting” button, otherwise, you also could consult our import consultant.
- Step 3After verifying your email, get response from suppliers or our trade manager will contact you as soon as possible
- Step 4Set up meeting with the Chinese supplier without language barrier